Chapter 6 X330WAN CLI Commands

set system name

Use the set system name command to set the system name.

Syntax

set system name [name string]

Parameters

name string System name. The system name is cleared if this field is left blank. A string of two words or more must be typed in quotation marks (e.g., “Backbone Stack”).

Example

X330WAN-2DS1-1(super)#set system name "Banking System"

set time client

Use the set time client command to enable or disable the periodic network time acquisition by the device from the network time server (SNTP or TIME protocol).

Syntax

set time client {enabledisable}

set time protocol

Use the set time protocol command to set the protocol for use in the system as either SNTP protocol or TIME protocol.

Syntax

set time protocol [sntp-protocoltime-protocol]

Example

X330WAN-2DS1-1(super)#set time protocol sntp-protocol

The protocol has been set to SNTP protocol

Example

X330WAN-2DS1-1(super)#set time protocol time-protocol

The protocol has been set to TIME protocol

102

Avaya X330WAN User’s Guide

Page 124
Image 124
Avaya X330WAN manual Set system name, Set time client, Set time protocol