Avaya X330WAN manual Configuration Example 2 for Site a Two VCs Between Sites, 149.49.54.80

VoIP Implementation with a G700 Media Gateway and an S8300 Media Server

Configuration Example 2 for Site A - Two VCs Between Sites

Following is the configuration procedure for the X330WAN-2USP, as shown in Figure 4.11. Commands with footnotes are described at the end of the configuration procedure.

•Loopback and PMI interfaces configuration:

X330WAN-2USP-1(super)# interface Loopback 1 X330WAN-2USP-1(super-if:Loopback1)# ip address 10.10.10.10 24

The Primary management interface has changed. Please copy the running configuration to the start-up configuration file, and reset the device.

X330WAN-2USP-1(super-if:Loopback1)# exit X330WAN-2USP-1(super)# copy running-configstartup-configX330WAN-2USP-1(super)# reset

•FabricFastEthernet interface configuration:

X330WAN-2USP-1(super)# interface FabricFastEthernet 1:1 X330WAN-2USP-1(super-if:FabricFastEthernet1:1)# ip address 1.1.1.1

24

X330WAN-2USP-1(super-if:FabricFastEthernet1:1)# exit X330WAN-2USP-1(super)# interface FabricFastEthernet 1:1.1 X330WAN-2USP-1(super-subif:FabricFastEthernet1:1.1)# ip address

149.49.54.80 24

X330WAN-2USP-1(super-if:FabricFastEthernet1:1.1)# exit X330WAN-2USP-1(super)# interface FabricFastEthernet 1:2 X330WAN-2USP-1(super-if:FabricFastEthernet1:2)# ip address

11.11.11.1 24

X330WAN-2USP-1(super-if:FabricFastEthernet1:2)# exit

•Configuration of a Policy list with the appropriate DSCP-CoS mappings:

X330WAN-2USP-1(super)#set qos policy-source local
X330WAN-2USP-1(super)# ip access-list-name			100 voice
X330WAN-2USP-1(super)# ip access-list-dscp			operation	100 34	fwd7
X330WAN-2USP-1(super)#	ip	access-list-dscp	operation	100 46	fwd6
X330WAN-2USP-1(super)#	ip	access-list-dscp	trust 100	trust-cos-dscp

•Activating the Policy List on the FabricFastEthernet interface:

X330WAN-2USP-1(super)# interface FabricFastEthernet 1 X330WAN-2USP-1(super-if:FabricFastEthernet1)# ip access-group 100 in X330WAN-2USP-1(super-if:FabricFastEthernet1)# exit

•Map-class configuration:

X330WAN-2USP-1(super)#map-class frame-relay voip

X330WAN-2USP-1(super-map-class)# cir out 128000 (1)

X330WAN-2USP-1(super-map-class)# bc out 16000 (2)

X330WAN-2USP-1(super-map-class)# exit

Avaya X330WAN User’s Guide 69