IBM SC30-3681-08 manual Conguring and Monitoring BSC Relay, Group type, Default value multipoint

Con®guring and Monitoring BSC Relay

con®guration commands. Table 72 shows the commands for both the network BSC
and protocol BRLY.
Table 72. BSC Relay Con®guration Commands Summary
	Network	Protocol
Command	BSC	BRLY	Function
? (Help)	yes	yes	Lists all of the con®guration commands or lists the
			options associated with speci®c commands.
Add		yes	Adds groups, local ports, and remote ports.
Delete		yes	Deletes groups, local ports, and remote ports.
Disable		yes	Disables groups and ports.
Enable		yes	Enables groups and ports.
List	yes	yes	Displays entire BSC Relay, group-speci®c, and
			interface con®gurations.
Set	yes		Sets the link parameters and remote station
			parameters.
Exit	yes	yes	Exits the BSC Relay con®guration environment
			and returns to the CONFIG environment.

Add
Use the add command to add groups, local ports, and remote ports.
Syntax:
add	group group#
	local-port
	remote-port
group group#
	De®nes a primary to secondary connection. Each different connection
	requires a different group number.
	Example: add group
	Group number: [1]? 1
	Group type: [multipoint]
	Group number
	The group number that you are designating for the group.
	Valid values: 1 to 16
	Default value: 1
	Group type
	Speci®es the type of BSC connection this group supports.
	Valid values: point-to-point or multipoint
	Default value: multipoint
local-port
	Identi®es the interface that you are using as the local port for a speci®c
	group. The local port is a connection to a BSC device that is connected
	directly to the 2210 you are con®guring. The following example adds a
	primary local port.
	Example: add local–port
	Group number: [1]? 1
	Interface number: [0]? 2
	(P)rimary or (S)econdary:[S]? p

568MRS V3.2 Software User's Guide