Con®guring and Monitoring BSC Relay

Enable

 

Use the enable command to turn on data transfer for an entire relay group or a

speci®c relay port.

 

Syntax:

 

enable

group group#

 

port

group group#

 

Allows transfer of BSC Relay frames to or from the speci®ed group.

Example: enable group 1

port Allows transfer of BSC Relay frames to or from the speci®ed local port.

Example: enable port

Group number: [1]? 2

 

Local or Remote: [local]? remote

Group number

 

The group number of the port that you want to enable.

Local or Remote

 

Speci®es whether to enable the local or remote port.

Default value: local

List (for network BSC)

 

Use the list command to display the con®guration of a speci®c BSC interface.

Syntax:

 

list

 

Example:

 

list

 

Maximum frame size in bytes:

2048

Encoding:

NRZI

Idle State:

Sync

Clocking:

Internal

Cable type:

V.35 DCE

Speed (bps):

2048000

Code:

ASCII

Link EOT:

No

Number of pairs of SYNs:

1

Maximum frame size in bytes

Maximum frame size that can be sent over the link. The maximum frame

size must be large enough to accommodate the largest frame and the 15

byte BRLY header.

 

Encoding

 

The transmission encoding scheme for the serial interface. Scheme is NRZ

(non-return to zero) or NRZI (non-return to zero inverted).

Idle State

 

The data link idle state: sync or mark.

Clocking

 

The type of clocking: internal, external.

Chapter 40. Con®guring and Monitoring BSC Relay 571

Page 607
Image 607
IBM SC30-3681-08 manual List for network BSC