IBM DS8000 manual CMUC00048E Commandinfo Array site VALUE0 does not exist

CMUC00048E COMMAND_INFO Array site VALUE_0 does not exist.

Explanation

You are attempting to list, show, or create an array, but the array site that is specified as a command parameter cannot be found.

Action

Correctly specify the array site, or resubmit the command with another array site ID.

Tip: Enter ″help command_name″ for more information.

CMUC00049E COMMAND_INFO Array ID VALUE_0 does not exist.

Explanation

The array that is specified as a command parameter cannot be found.

Action

Correctly specify the array ID, and then resubmit the command.

Tip: Enter ″help command_name″ for more information.

CMUC00050E COMMAND_INFO Rank ID VALUE_0 does not exist.

Explanation

You are attempting to list, show, change, or remove a rank, but the rank that is specified as a command parameter cannot be found.

Action

Correctly specify the rank ID, and then resubmit the command.

Tip: Enter ″help command_name″ for more information.

CMUC00051E COMMAND_INFO Extent pool VALUE_0 does not exist.

Explanation

The extent pool that is specified as a command parameter cannot be found.

Action

Specify the correct extent pool ID, and then resubmit the command.

Tip: Enter ″help command_name″ for more information.

CMUC00052E COMMAND_INFO Storage image VALUE_0 does not exist.

Explanation

The storage image that is specified as a command parameter (for example, -dev) cannot be found.

Chapter 2. DS command-line interface messages 23