IBM DS8000 manual Command requires a single subsystem ID as a parameter

Action

Specify a pair of subsystem IDs, and then resubmit the command.

Tip: Enter ″help command_name″ for more information.

CMUC00100E COMMAND_INFO A pair of subsystem IDs VALUE_0 is specified. A single subsystem ID is required for this command.

Explanation

The command requires a single subsystem ID as a parameter.

Action

Specify a single subsystem ID, and then resubmit the command.

Tip: Enter ″help command_name″ for more information.

CMUC00101E COMMAND_INFO FlashCopy pairs VALUE_0 are persistent.

The -wait option cannot be specified for persistent pairs.

Explanation

The FlashCopy pairs were established as persistent, with the intention of retaining the relationship after the copy completes. This definition overrides the -waitoption.

Action

Resubmit the command without the -waitoption.

Tip: Enter ″help command_name″ for more information.

CMUC00102E COMMAND_INFO The -cp option must be used in conjunction with the -wait option.

Explanation

You must include a -cpflag and value when the -waitoption is used with this command.

Action

Resubmit the command, specifying both -cpand -waitflags and values, or omit the -waitoption.

Tip: Enter ″help command_name″ for more information.

Chapter 2. DS command-line interface messages 35