IBM DS8000 manual Select a FlashCopy relationship, and then resubmit the task

CMUS00025E The relationship properties cannot be displayed. The relationship no longer exists.

Explanation

The specified relationship has been removed by another user, or it was removed automatically when a background copy completed.

Action

Close the properties page. The relationship will disappear from the main panel.

Select a different relationship, and then resubmit the task.

CMUS00026E Relationships VALUE_0 specify volumes with incompatible sizes. These relationships will not be created.

Explanation

The specified relationships will not be created because the volume sizes are not compatible. For example, the target volume might be smaller than the source volume.

Action

Return to the previous panel to select compatible volumes, click the Cancel button to cancel the operation, or click the Finish button to create the remaining relationships.

CMUS00027W The paths you are attempting to remove are used by existing Remote Mirror and Copy pairs. All paths cannot be removed from target LSSs VALUE_0 while pairs exist. The Remote Mirror and

Copy pairs must be removed before all paths can be removed.

Explanation

You must remove any Remote Mirror and Copy pairs that use the only remaining path before you can remove the path.

Action

Remove any Remote Mirror and Copy pairs that use the paths, and then resubmit the task.

CMUS00028E You must select at least one FlashCopy relationship.

Explanation

You must select a relationship before you can initiate a background copy or commit or discard changes. No relationship is selected.

Action

Select a FlashCopy relationship, and then resubmit the task.

Chapter 4. DS Storage Manager Copy Services messages 125