CMUC00103E COMMAND_INFO When specifying the -range parameter, the starting and ending volume IDs must be on the same storage image.

Explanation

The -rangeparameter initiates a query that displays volume relationships that exist for source or target volumes within the specified volume ID range. The range is meaningless unless it is specified for volumes that are on the same storage image.

Action

Specify volumes on the same storage image, and then resubmit the command.

Tip: Enter help command_namefor more information.

CMUC00104E COMMAND_INFO The specified options for this command are incompatible or invalid: VALUE_0

Explanation

You are attempting to establish or change a path. Two or more of the options that have been supplied are incompatible, or at least one of the options is invalid.

Action

Specify compatible and valid options, and then resubmit the command.

Tip: Enter help command_namefor more information.

CMUC00105E COMMAND_INFO The following parameters are incompatible:

VALUE_0.

Explanation

Two or more of the command parameters are incompatible.

Action

Specify only compatible parameters, and then resubmit the command.

Tip: Enter help command_namefor more information.

CMUC00106E COMMAND_INFO The parameter value VALUE_0 is larger than the maximum allowable value: VALUE_1.

Explanation

The parameter that has been supplied is larger than the maximum value that is allowed.

Action

Specify a value equal to or lower than the maximum value that is allowed, and then resubmit the command.

36IBM TotalStorage DS8000: Messages Reference

Page 56
Image 56
IBM DS8000 manual VALUE0