IBM DS8000 manual CMUG00040E Nicknames must be no more than 16 characters long

Action

Enter a numerical value for the suffix.

CMUG00037E You must enter an alphabetic prefix or a numeric suffix. You may enter both.

Explanation

This operation assists you in creating a range of volume nicknames consisting of an alphabetic prefix followed by a number that increases sequentially. If you enter a prefix only, all the volumes you create will have the same nickname. If you enter a suffix only, the volumes you create will be identified by a sequence of numerical volume nicknames. If you enter both a prefix and a suffix, the volume nicknames will all have the same prefix, and have numerically increasing suffixes.

Action

Enter a prefix, a suffix, or both.

CMUG00038W Extent pools will be deleted. Select OK to delete the extent pools. Select Cancel to cancel the operation.

Explanation

You are being asked to confirm that you want to delete the selected extent pools.

Action

Select OK to delete the extent pools. Select Cancel to cancel the operation.

CMUG00039W The extent pools have volumes configured in them. These volumes will be deleted as part of the extent pool deletion process: VALUE_0. Select Continue to delete the extent pools and volumes that are listed. Select Cancel to cancel the operation.

Explanation

Deleting the selected extent pools also deletes the volumes that are configured in the extent pools.

Action

Select Continue to delete the extent pools and volumes that are listed in the message. Select Cancel to cancel the operation.

CMUG00040E Nicknames must be no more than 16 characters long.

Explanation

The entered nickname is longer than the allowed maximum length.

74IBM TotalStorage DS8000: Messages Reference