IBM DS8000 manual CMMCI9046E Unrecognized syntax error in command commandname

CMMCI9044E Entry entry_value exceeds the length limit

(entry_limit) for one item for the -parameter_nameparameter.

Explanation

The length of the value that you specified for this parameter is too long.

Action

Run the command again, making sure that you specify valid values for all parameters. Enter ″help command_name″ for a list of valid parameters and parameter values.

CMMCI9045E The value for -parameter_namemust be operator the

current setting of value.

Explanation

The value that you specified for the listed operator is not valid. The operator explains how value must be changed.

Action

Run the command again, making sure that you specify valid values for all parameters. Enter ″help command_name″ for a list of valid parameters and parameter values.

CMMCI9046E Unrecognized syntax error in command command_name

Explanation

There is a syntax error in the command that you specified.

Action

Run the command again, making sure that you use a valid syntax. Enter ″help command_name″ for the syntax to use.

CMMCI9047E Cannot run command_name as a command within the application_name application. Tip: Enter ″help command_name″ for more information.

Explanation

You cannot specify the command command_name within this application.

Action

Enter ″help command_name″ for more information about using this command.

10IBM TotalStorage DS8000: Messages Reference