IBM DS8000 manual CMUC00122E Commandinfo Invalid admin user, Group

Action

Use the correct user name and account file name combination, and then resubmit the command.

CMUC00122E COMMAND_INFO Invalid admin user.

Explanation

You are attempting to show a user. Your user name is not a member of the admin group, and lacks sufficient privileges to use this command.

Action

Resubmit the command as a user who is a member of the admin group.

CMUC00123E COMMAND_INFO Unable to create user account USERNAME.

Explanation

You are attempting to create a new user on the management console server. The task fails.

Action

Ensure that the management console server is available and that you have proper privileges to create a user account. You must be a member of the admin group to use this command. Resubmit the command.

CMUC00124E COMMAND_INFO Unable to assign user USERNAME to group

GROUP.

Explanation

You are attempting to create a new user on the management console server. The user cannot be assigned to the specified group.

Action

Ensure that the group exists. If the problem persists, contact IBM technical support for assistance.

CMUC00125E COMMAND_INFO Unable to modify user group to NEW_GROUP.

Explanation

You are attempting to change a user’s group to a new group. The user’s group cannot be modified to the specified group.

Action

Ensure that the group exists. If the problem persists, contact IBM technical support for assistance.

Chapter 2. DS command-line interface messages 41