IBM DS8000 manual Port profile length cannot be more than 16 characters

CMUN02117E SOURCE Unable to modify SCSI host port: invalid override default priority value

Explanation

The attribute that indicates whether the default priority for I/O operations is to be overridden is invalid. The value must be either true or false.

Action

Correct the port specification, and then resubmit the task. If the problem persists, contact IBM technical support for assistance.

CMUN02118E SOURCE Unable to modify SCSI host port: invalid port profile

Explanation

The port profile length cannot be more than 16 characters.

Action

Correct the port specification, and then resubmit the task. If the problem persists, contact IBM technical support for assistance.

CMUN02119E SOURCE Unable to modify SCSI host port: invalid port topology

Explanation

The attaching port topology must be one of the following:

vUnknown

vFibre Channel Point to Point or Switched (FCP)

vFibre Channel Arbitrated Loop (FC-AL)

Action

Specify a valid attaching port topology, and then resubmit the task.

CMUN02120E SOURCE Unable to modify SCSI host port: address discovery method and volume group type mismatch

Explanation

The Report LUNs address discovery method requires a SCSI-Mask, SCSI-Map 256, or SCSI520-Mask volume group type.

Action

Specify compatible address discovery method and volume group types, and then resubmit the task.

176IBM TotalStorage DS8000: Messages Reference