Manuals / Brands / Computer Equipment / Server / IBM / Computer Equipment / Server

IBM DS8000 CMUG00123E The selected storage complexes do not exist in the current configuration., CMUG00124E Invalid logical volume size. See the help text for this message for valid sizes.

1 374

Download 374 pages, 2.28 Mb

Action

Configure one or more additional extent pools, and then resubmit the task.

CMUG00123E The selected storage complexes do not exist in the

current configuration.

Explanation

You began to delete one or more storage complexes from an enterprise, but the

enterprise configuration changed or the enterprise was closed before you completed

the task for the following possible reasons:

v The storage complexes were deleted from another session.

v The enterprise was closed and you are now configuring another enterprise.

v The network connection to the storage complexes failed.

Action

Close the current panels and reopen the enterprise. If the problem persists, contact

IBM technical support for assistance.

CMUG00124E Invalid logical volume size. See the help text for

this message for valid sizes.

Explanation

The specified volume size is not supported on all platforms. Supported logical

volume sizes are microcode level dependent.

For DS microcode levels 5.0.3 and above:

v Supported Enterprise Storage System (ESS) logical volume sizes range from 0.1

to 982.2 decimal gigabytes (1GB = 10^9 bytes). You can calculate the exact

number of 512 byte blocks as INT((INT(GBx10^9/512)+63)/64)x64. The size of

the volume that is created on the ESS is identical to the size of the volume that

is created on the DS.

v Supported DS logical volume sizes range from 1 to 2048 binary gigabytes (1GB

= 2^30 bytes). This allocation uses the storage capacity of DS systems most

efficiently.

v Supported block logical volume sizes range from 1 to 4 binary gigablocks (1

gigablock = 2^30 512-byte blocks). If a specified size matches a supported DS or

ESS logical volume size, the volume is identified as a DS or ESS logical volume,

even though it is created by specifying the blocks volume type.

v Supported iSeries logical volume sizes are expressed in decimal gigabytes (1GB

= 10^9 bytes):

A0 (8.6 GB protected) A81 (8.6GB, unprotected)

A02 (17.5 GB protected) A82 (17.5 GB unprotected)

A04 (70.5 GB protected) A84 (70.5 GB unprotected)

A05 (35.1 GB protected) A85 (35.1 GB unprotected)

A06 (141.12 GB protected) A86 (141.12 GB unprotected)

A07 (282.25 GB protected) A87 (282.25 GB unprotected)

For DS microcode levels 5.0.1 and 5.0.2, block logical volume sizes must be a

multiple of 128, and ESS logical volume sizes must be in the following list:

Chapter 3. DS Storage Manager messages 95

Contents

Main Page Page Page About messages Copyright IBM Corp. 2004, 2005 iii Page Safety and environmental notices Copyright IBM Corp. 2004, 2005 v The following typefaces are used to show emphasis: Safety notices Environmental notices Related information GC35-0495 vi group. Title Description Other IBM publications Order Number Data-copy services z/OS DFSMS Advanced Copy Services SC35-0428 IBM Enterprise Storage Server SG24-5465 Implementing Copy Services 0n S/390 viii Order Number IBM TotalStorage ESS Implementing Copy Services in an Open Environment SG24-6119 SG24-5757 Fibre channel Fibre Channel Connection (FICON) I/O Interface: Physical Layer Title Description Order Number IBM TotalStorage ESS Implementing Copy Services in an Open Environment Safety and environmental notices ix SB10-7029 SG24-5757 x Order Number IOCP Users Guide, IBM e(logo)server zSeries This publication provides a detailed definition of the z/Architecture This publication lists OS/390 MVS V1R1. Title Description Order Number IBM OS/390 Hardware Configuration Definition Users Guide Safety and environmental notices xi This publication introduces the IBM Versatile Storage Server SC28-1848 Ordering IBM publications xii IBM publications center Publications notification system Web sites How to send your comments xiv Summary of Changes for GC26-7659-04 IBM TotalStorage DS8000 New Information The following messages have been added in this edition. Changed Information The following messages have been changed in this edition. Deleted Information No messages have been deleted in this edition. xvi Moved Information The following messages have been moved in this edition. Summary of Changes for GC26-7659-04 IBM TotalStorage DS8000 Page Chapter 1. Framework messages Framework messages These messages are issued by the user interface framework. Copyright IBM Corp. 2004, 2005 1 Make sure that the object with the attributes that you are modifying exists. An unexpected value was returned for this command. CMMCI9005I There is nothing to modify. 2 CMMCI9006E No class_type instances object_name found that match criteria: criteria . CMMCI9007E object_type object_name does not exist. You are attempting to run a command on an object that does not exist. CMMCI9010E The command did not complete successfully. Chapter 1. Framework messages You specified a dash, but you did not specify a parameter name after the dash. The command did not complete successfully. Verify that you are using the correct syntax. Then run the command again. CMMCI9017E Parameter parameter_name is already specified. The parameter parameter_name is required. 4 You are attempting to specify the same parameter twice on a single command. CMMCI9018E Parameter parameter_name is missing a required value. CMMCI9023E parameter_name is mutually exclusive of parameter_name Chapter 1. Framework messages Run the command again, specifying only one of the parameters. CMMCI9026E Unmatched character_value characters. There are unmatched character_value characters in the command that you specified. CMMCI9027E Invalid value for parameter_name. The length exceeds maximum_length characters. 6 CMMCI9028E The value value specified for parameter parameter_value is not valid. CMMCI9029E object_type object_name does not exist. You specified the object object_type with the name object_name, but it does not exist. CMMCI9031E The help page for command command_name does not exist. You requested help for the command command_name, but no help exists for this command. Chapter 1. Framework messages CMMCI9032E You must specify parameter parameter_name if you specify parameter parameter_name CMMCI9033E File file_name does not exist. CMMCI9036E The value value for parameter -parameter_name is already specified. You are attempting to specify the same parameter twice in a single command. 8 CMMCI9037E Multiple targets not allowed for command command_name You cannot specify multiple targets for this command. CMMCI9042E The value for the parameter -parameter_name cannot contain a value . You specified a value for this parameter that is not valid. CMMCI9043E Number of entries (entries) is exceeded for the - parameter_name parameter. You specified too many values for this parameter. The length of the value that you specified for this parameter is too long. CMMCI9045E The value for -parameter_name must be operator the current setting of value . CMMCI9046E Unrecognized syntax error in command command_name There is a syntax error in the command that you specified. You cannot specify the command command_name within this application. The value that you entered for the date specifier is invalid. CMUF00000E You must enter a user name. You must enter a user name to log into the DS Storage Manager. Enter a user name, and then resubmit the task. CMUF00001E You must enter a password. Enter a password, and then resubmit the task. CMUF00002E You must enter a user name and a password. You must enter a user name and a password to log into the DS Storage Manager. 12 Enter a user name and a password, and then resubmit the task. CMUF00003E An unexpected error has occurred. Chapter 2. DS command-line interface messages DS CLI messages These messages are issued by the DS command-line interface. Copyright IBM Corp. 2004, 2005 13 The array has been created successfully. CMUC00000I COMMAND_INFO Extent pool VALUE_0 successfully created. CMUC00005W COMMAND_INFO Are you sure you want to delete array ARRAY_ID? [y/n]: Enter Y to delete the rank. Enter N to cancel the operation. 14 You are being asked to confirm that you want to delete the array. Enter Y to delete the array. Enter N to cancel the operation. CMUC00011I COMMAND_INFO I/O Port VALUE_0 successfully configured. The I/O port has been configured successfully. None. CMUC00012I COMMAND_INFO Host connection VALUE_0 successfully created. The host connection has been created successfully. CMUC00015I COMMAND_INFO Host connection VALUE_0 successfully deleted. You are being asked to confirm that you want to delete the logical control unit. 16 The host connection has been deleted successfully. None. CMUC00020I COMMAND_INFO LCU VALUE_0 successfully deleted. Chapter 2. DS command-line interface messages None. The logical control unit has been deleted successfully. None. CMUC00025I COMMAND_INFO FB volume VALUE_0 successfully created. The fixed block volume has been created successfully. 18 None. CMUC00026I COMMAND_INFO FB volume VALUE_0 successfully modified. CMUC00030I COMMAND_INFO Volume group VALUE_0 successfully created. The volume group has been created successfully. Chapter 2. DS command-line interface messages Enter Y to delete the data. Enter N to cancel the operation. None. CMUC00035I COMMAND_INFO Pinned tracks START to END on volume VOLUME_ID successfully deleted. The pinned track data on the volume has been deleted successfully. 20 Enter Y to clear the volume. Enter N to cancel the operation. None. CMUC00040I COMMAND_INFO Storage complex VALUE_0 successfully modified. The storage complex has been modified successfully. None. CMUC00041I COMMAND_INFO Storage unit VALUE_0 successfully modified. The storage unit has been modified successfully. CMUC00044E COMMAND_INFO Unknown error returned by management console server. The management console server reports a failure for unknown reasons. 22 CMUC00045E COMMAND_INFO ERROR_CODE Unknown error code returned by management console server. The management console server returns an unknown error code. CMUC00048E COMMAND_INFO Array site VALUE_0 does not exist. Chapter 2. DS command-line interface messages CMUC00049E COMMAND_INFO Array ID VALUE_0 does not exist. The array that is specified as a command parameter cannot be found. CMUC00050E COMMAND_INFO Rank ID VALUE_0 does not exist. CMUC00053E COMMAND_INFO I/O port VALUE_0 does not exist. The I/O port that is specified as a command parameter cannot be found. 24 CMUC00054E COMMAND_INFO LSS VALUE_0 does not exist. CMUC00055E COMMAND_INFO Storage image ID VALUE_0 does not exist. CMUC00057E COMMAND_INFO Volume group VALUE_0 does not exist. Chapter 2. DS command-line interface messages CMUC00058E COMMAND_INFO Volume VALUE_0 does not exist. The volume ID that is specified as a command parameter cannot be found. CMUC00059E COMMAND_INFO Storage complex VALUE_0 does not exist. CMUC00062E COMMAND_INFO Storage management console enclosure VALUE_0 does not exist. 26 CMUC00063E COMMAND_INFO I/O enclosure VALUE_0 does not exist. CMUC00064E COMMAND_INFO Processor complex enclosure VALUE_0 does not exist. CMUC00065E COMMAND_INFO Frame enclosure VALUE_0 does not exist. CMUC00066E COMMAND_INFO Storage enclosure VALUE_0 does not exist. Chapter 2. DS command-line interface messages CMUC00067E COMMAND_INFO FRU VALUE_0 does not exist. CMUC00068E COMMAND_INFO Host connection VALUE_0 does not exist. CMUC00069E COMMAND_INFO Invalid storage image ID VALUE_0. CMUC00070E COMMAND_INFO Inconsistent storage image ID VALUE_0. Two or more different storage image IDs are specified in a single command. 28 The format of the rank ID is incorrect. CMUC00071E COMMAND_INFO Invalid ID VALUE_0. CMUC00075E COMMAND_INFO Invalid extent pool ID VALUE_0. Chapter 2. DS command-line interface messages The format of the extent pool ID is incorrect. CMUC00076E COMMAND_INFO Invalid address group VALUE_0. The format of the specified address group is incorrect. CMUC00079E COMMAND_INFO Invalid LSS VALUE_0. The format of the specified logical subsystem is incorrect. 30 CMUC00080E COMMAND_INFO Invalid storage unit ID VALUE_0. The format of the specified storage unit ID is incorrect. CMUC00083E COMMAND_INFO Invalid volume VALUE_0. The format of the specified volume ID is incorrect. Chapter 2. DS command-line interface messages CMUC00084E COMMAND_INFO The specified parameter VALUE_0 is out of range. The specified parameter value is not within acceptable limits. CMUC00087E COMMAND_INFO The specified LCU VALUE_0 is invalid. The specified logical control unit is invalid. 32 The format of the specified subsystem ID is invalid. CMUC00088E COMMAND_INFO The specified LCU VALUE_0 already exists. CMUC00092E COMMAND_INFO The specified volume ID VALUE_0 already exists. Chapter 2. DS command-line interface messages The specified volume exists. Use a volume ID not currently in use, and then resubmit the command. CMUC00093E COMMAND_INFO The specified volume VALUE_0 is not type CKD. CMUC00096E COMMAND_INFO No remote storage image ID is specified. 34 Chapter 2. DS command-line interface messages The command requires a single subsystem ID as a parameter. CMUC00102E COMMAND_INFO The -cp option must be used in conjunction with the -wait option. You must include a -cp flag and value when the -wait option is used with this command. 36 CMUC00105E COMMAND_INFO The following parameters are incompatible: VALUE_0 . Two or more of the command parameters are incompatible. Tip: Enter help command_name for more information. Chapter 2. DS command-line interface messages CMUC00110E COMMAND_INFO No matching candidate connection found. 38 CMUC00112E COMMAND_INFO Port candidate VALUE_0 is not available for an ESCON connection. CMUC00113E COMMAND_INFO Record VALUE_1 already exists in password file FILE_NAME . CMUC00114E COMMAND_INFO Record VALUE_1 does not exist in password file FILE_NAME . Chapter 2. DS command-line interface messages CMUC00115E COMMAND_INFO User account file VALUE_0 not found. CMUC00116E COMMAND_INFO User account file FILE_NAME is used for another user. Specify another file name, and then resubmit the command. CMUC00118E COMMAND_INFO Unable to update password file FILE_NAME. 40 CMUC00119E COMMAND_INFO Invalid password format. The format of the specified password is invalid. v - 9) in length. v v v Use an appropriately formatted password, and then resubmit the command. CMUC00122E COMMAND_INFO Invalid admin user. Chapter 2. DS command-line interface messages Resubmit the command as a user who is a member of the admin group. CMUC00123E COMMAND_INFO Unable to create user account USERNAME. You are attempting to create a new user on the management console server. The task fails. CMUC00126E COMMAND_INFO Unable to modify password. 42 You are attempting to delete a user on the management console server. The task fails. CMUC00129E COMMAND_INFO All source volumes must be within the same logical subsystem. CMUC00130E COMMAND_INFO All target volumes must be within the same logical subsystem. Chapter 2. DS command-line interface messages The user has been created successfully. CMUC00131E COMMAND_INFO Operation failure The lshostvol command fails for one of the following reasons: v v v CMUC00134I COMMAND_INFO User USERNAME successfully modified. The user has been modified successfully. 44 None. CMUC00135W COMMAND_INFO Are you sure you want to delete user USERNAME? [y/n]: CMUC00139E COMMAND_INFO FlashCopy pair VALUE_0 cannot be created. Chapter 2. DS command-line interface messages None. The FlashCopy pair cannot be created. Contact IBM technical support for assistance. CMUC00144W COMMAND_INFO Are you sure you want to remove the FlashCopy pair PAIR_ID ? [y/n]: Enter Y to delete the pair. Enter N to cancel the operation. CMUC00145I COMMAND_INFO Session SESSION_ID opened successfully. The Global Mirror session has opened successfully. None. CMUC00148W COMMAND_INFO Are you sure you want to close session SESSION_ID? [y/n]: Chapter 2. DS command-line interface messages None. You are being asked to confirm that you want to close the session that you specified. Enter Y to close the session. Enter N to cancel the operation. 48 None. Enter Y to remove the path. Enter N to cancel the operation. None. None. None. None. None. 50 Global Mirror for the session has resumed successfully. CMUC00161W COMMAND_INFO Remote Mirror and Copy consistency group VALUE_0 successfully created. The Remote Mirror and Copy consistency group was created successfully. None. CMUC00162I COMMAND_INFO Global Mirror for session SESSION_ID successfully started. Global Mirror for the session started successfully. CMUC00165I COMMAND_INFO Global Mirror for session SESSION_ID successfully stopped. Chapter 2. DS command-line interface messages None. Global Mirror for the session has been stopped successfully. None. CMUC00169I COMMAND_INFO FlashCopy volume pair PAIR_ID successfully reversed. 52 None. CMUC00170I COMMAND_INFO FlashCopy volume pair PAIR_ID successfully committed. None. CMUC00174I COMMAND_INFO Remote FlashCopy pair PAIR_ID successfully made revertible. None. None. CMUC00176I COMMAND_INFO Remote FlashCopy volume pair PAIR_ID successfully committed. CMUC00177I COMMAND_INFO Remote FlashCopy volume pair PAIR_ID successfully reverted. 54 None. CMUC00178I COMMAND_INFO Remote FlashCopy volume pair PAIR_ID successfully reversed. None. CMUC00181E COMMAND_INFO A user name must be specified. Chapter 2. DS command-line interface messages CMUC00182E COMMAND_INFO No management console IP address is specified. CMUC00183E COMMAND_INFO Invalid management console IP address: VALUE_0 . CMUC00185E Unable to access CLI user profile file FILE_NAME. 56 CMUC00186E User profile file FILE_NAME. not found. The specified profile file cannot be found. Ensure that the file exists in the proper location. CMUC00188E Unable to read CLI user password file FILE_NAME. Chapter 2. DS command-line interface messages CMUC00189E Internal error: VALUE_0. The CLI reports an internal error. Contact IBM technical support for assistance. CMUC00193E VALUE_0: Authentication failure: unable to access account database. 58 Contact your system administrator. CMUC00195I COMMAND_INFO Security properties successfully set. The security properties have been set successfully. CMUC00197I COMMAND_INFO Remote Mirror and Copy pair PAIR_ID successfully failed back. Chapter 2. DS command-line interface messages Tip: Enter help command_name for more information. None. CMUC00198I COMMAND_INFO Remote Mirror and Copy pair PAIR_ID successfully thawed. CMUC00202I COMMAND_INFO Remote Mirror and Copy ESCON path TARGET_LSS successfully created. The Remote Mirror and Copy ESCON path has been created successfully. None. CMUC00203E COMMAND_INFO Invalid pair. Each source volume must have a matching target volume. Enter complete source_volume:target_volume pairs, and then resubmit the task. CMUC00206I COMMAND_INFO Record VALUE_1 successfully added to password file FILE_NAME . Chapter 2. DS command-line interface messages The specified record has been added to the password file. None. CMUC00207I COMMAND_INFO Record VALUE_1 successfully changed in password file FILE_NAME . CMUC00210E Password file FILE_NAME is not formatted corrrectly. 62 Resubmit the task. If the problem persists, specify a different file. Specify a correctly formatted password file, and then resubmit the task. CMUC00211E COMMAND_INFO The specified capacity CAPACITY is not valid for type TYPE . CMUC00215E COMMAND_INFO Incorrectly formatted License Machine Code activation codes file Specify the correct file and then resubmit the task. CMUC00216I COMMAND_INFO CKD alias volume VOLUME successfully created. The CKD alias volume was created successfully. None. CMUC00220E COMMAND_INFO Connection failure: VALUE_0 Connection to the specified storage management consoles failed. CMUC00219X COMMAND_INFO Chapter 3. DS Storage Manager messages Copyright IBM Corp. 2004, 2005 65 CMUG00000E Select an array from the table or create a new array. CMUG00001E Select an extent pool from the table or create a new extent pool. You must associate the rank with an extent pool by selecting an extent pool from the table. CMUG00005E Select at least one ID from the table of available LCU IDs. Select at least one LCU ID from the table of available LCU IDs. Chapter 3. DS Storage Manager messages CMUG00008E An SSID is required. Enter an SSID. CMUG00009E An SSID must be a 4 hexadecimal digit non zero number. CMUG00010E The SSID is not unique. The logical subsystem identifier (SSID) must be unique. CMUG00012E Consistency group timeout: A positive integer value is required. Select an extent pool from the table. 68 Enter a positive integer value in the field. CMUG00013E Select at least one LCU. CMUG00016E VALUE_0 must be between VALUE_1 and VALUE_2. Chapter 3. DS Storage Manager messages Enter a value within the specified range. CMUG00017E You must enter an alphabetic prefix or a numeric suffix. You may enter both. Enter a prefix, a suffix, or both. CMUG00022E Select a volume group. Select a volume group or uncheck the check box. CMUG00023E You must select one volume to complete the operation. CMUG00024E You must select at least one volume to complete the operation. Chapter 3. DS Storage Manager messages Select at least one volume. You are being asked to confirm that you want to delete the selected volumes. Select OK to delete the volumes. Select Cancel to cancel the operation. CMUG00030E No base volumes have been specified. To add aliases, the number of base volumes must be greater than zero. Specify at least one base volume, and then resubmit the task. CMUG00031E The selected extent pool is too small. No volumes can be created. CMUG00032E All of the selected volumes must be of the same data type. CMUG00036E The value you enter for a suffix must be a number. Enter a numerical value for the suffix. CMUG00037E You must enter an alphabetic prefix or a numeric suffix. You may enter both. The entered nickname is longer than the allowed maximum length. 74 Enter a prefix, a suffix, or both. You are being asked to confirm that you want to delete the selected extent pools. CMUG00041E The requested storage is not available. Only VALUE_0 GB is available. Chapter 3. DS Storage Manager messages Enter an integer between 0 and 100. More storage space than the amount that is available has been requested. Enter an amount less than or equal to the amount available. CMUG00046E The threshold amount is not available. Only VALUE_0 GB is available. You are requesting a threshold amount greater than the available amount. 76 Enter an amount less than or equal to the available amount. CMUG00047E Select an array site. CMUG00052E A nickname is required. A nickname is required to continue the wizard. Enter a nickname. CMUG00053E Select at least one volume. To continue, at least one volume must be selected from the table. CMUG00055E Select one or more host types. 78 Select a type from the drop-down list. Select one or more host types from the list of available host types. CMUG00056E A host nickname is required. CMUG00060E Select WWPNs for all the ports. Chapter 3. DS Storage Manager messages Select a storage image to which the host port can be attached. To identify each port, select a WWPN from the list, or manually enter a WWPN. CMUG00061E Select a host attachment identifier to connect to the storage image ports. CMUG00064E A host nickname is required. 80 Enter a host nickname. You are modifying a host attachment, but no quantity is entered. Enter the number of ports for this port type in the quantity field. CMUG00071E Select one or more of the choices below. 82 CMUG00073E Storage complex authentication error. Specify the correct management console IP address, user name, and password. If you proceed, the unit is turned on. If you proceed, the unit is turned off. If you proceed, the unit is forced offline. CMUG00079W Cannot perform the task. The storage unit is not online. 84 Add at least two DDM packs to the Selected DDM packs table. CMUG00082E At least two DDM packs must be added to the Selected DDM packs table. CMUG00083E Invalid I/O adapter quantity. The quantity must be between VALUE_0 . and VALUE_1 . Chapter 3. DS Storage Manager messages Specify a valid adapter quantity. CMUG00085E Select a storage complex. Select a storage complex from the list. CMUG00089E Incorrectly formatted License Machine Code activation codes file CMUG00090E Incorrect License Machine Code activation codes file Chapter 3. DS Storage Manager messages CMUG00093E You must add at least one host attachment to the storage image. Add at least one host attachment, and then resubmit the task. CMUG00094E Unable to attach host. No I/O port is selected. You have selected a host to attach to an I/O port, but no I/O port is selected from the table. 88 CMUG00096E Model 2105 storage unit authentication error Provide a valid IP address, user name, and password. You are being asked to confirm that you want to delete the selected enterprise configuration. CMUG00099W Select an xml file that contains an enterprise configuration. Chapter 3. DS Storage Manager messages Select unique WWPNs for each port, and then resubmit the task. CMUG00100E Unable to connect to the specified storage management console. You are being asked to provide the IP addresses of two different storage management consoles. CMUG00103E Enter unique WWPNs for ports VALUE_0. 90 Enter unique WWPNs for each port, and then resubmit the task. Select unique WWPNs for the port, and then resubmit the task. You are being asked to confirm that you want to delete the ranks. CMUG00107E A nickname must be between 1 and 16 characters long. You must specify a nickname that is between 1 and 16 characters in length. Chapter 3. DS Storage Manager messages CMUG00108E You must select at least one array site before you can continue. To create an array, you must first select an array site. CMUG00111E The nickname NICKNAME is already used for another host. Enter a unique nickname. 92 Enter the number of short wave adapters (0, 2 - 32). Do not enter 1. Specify a unique nickname, and then resubmit the task. CMUG00115E Select a machine model from the list. The model is required. Chapter 3. DS Storage Manager messages Select a model from the list, and then resubmit the task. CMUG00117I The default enterprise is being opened. CMUG00121W The selected volume size is compatible with only iSeries V5R3. CMUG00122E Unable to create volume. No extent pools are available. Configure one or more additional extent pools, and then resubmit the task. CMUG00123E The selected storage complexes do not exist in the current configuration. Chapter 3. DS Storage Manager messages CMUG00124E Invalid logical volume size. See the help text for this message for valid sizes. 96 Page 106.1 (98.8) 106.6 (99.3) 106.7 (99.4) 106.8 (99.5) 98 Chapter 3. DS Storage Manager messages 100 Chapter 3. DS Storage Manager messages 102 Chapter 3. DS Storage Manager messages 104 Chapter 3. DS Storage Manager messages 106 Chapter 3. DS Storage Manager messages 108 Chapter 3. DS Storage Manager messages 110 Chapter 3. DS Storage Manager messages 112 Chapter 3. DS Storage Manager messages Specify a valid volume size and then resubmit the task. CMUG00125E The local storage complex cannot be removed from this configuration. None. 114 Select a different storage complex to remove, or close the form. CMUG00127E No volume groups exist. You must create a volume group before you can continue. You must create at least one volume group before you can add a volume to a volume group. Chapter 3. DS Storage Manager messages Create at least one volume group, and then resubmit the task. CMUG00129E The management console server is not available. CMUG00131E The specified location for adapter ADAPTER is already in use. The location that you specified for the adapter is already in use. 116 Specify an unused adapter location and then resubmit the task. Fully specify the location of the adapter and then resubmit the task. CMUG00135E The selected storage unit is not available. Chapter 3. DS Storage Manager messages CMUG00136E The selected storage image is not available. 118 Chapter 4. DS Storage Manager Copy Services messages Copyright IBM Corp. 2004, 2005 119 You are being asked to confirm that you want to delete the selected FlashCopy relationships. CMUS00002E You must select at least one source volume to create relationships. You must select a source volume to create a relationship, CMUS00004E You must select at least one source volume to create relationships. Contact IBM technical support for assistance. 120 To create a FlashCopy relationship, you must select a source volume. Select a source volume from the table. CMUS00008E The FlashCopy reverse fails. Chapter 4. DS Storage Manager Copy Services messages Select one or more I/O ports. Contact IBM technical support for assistance. CMUS00009E You must select a source logical subsystem. CMUS00014E You must select a master logical subsystem for the Global Mirror relationship. To create an Global Mirror relationship, a master logical subsystem must be selected. Select a master logical subsystem. You are being asked to confirm that you want to resume the selected Global Mirror relationships. You are being asked to confirm that you want to pause the selected Global Mirror relationships. CMUS00017E Unable to start Global Mirror session. Chapter 4. DS Storage Manager Copy Services messages Select either Enable all or Disable all , and then resubmit the task. Contact IBM technical support for assistance. CMUS00018E Invalid session number. CMUS00021E Enable change recording option: no valid value selected 124 Select either Enable all or Disable all , and then resubmit the task. Select either Enable all or Disable all , and then resubmit the task. CMUS00023E Fast reverse: no valid value selected CMUS00028E You must select at least one FlashCopy relationship. CMUS00029E No source LSS is available in the selected storage image. 126 You can continue, but you must make the storage unit or storage image a master. CMUS00031E Invalid logical subsystem: No paths to the subordinates exist. CMUS00032E No target LSS is available for the selected source LSS. CMUS00033E Select at least one volume. Chapter 4. DS Storage Manager Copy Services messages Select at least one volume, and then resubmit the task. CMUS00034E No session numbers are available for the selected volumes. Page Chapter 5. DS Storage Manager console messages Console messages These messages are issued by the DS Storage Manager. Copyright IBM Corp. 2004, 2005 129 CMUL00000E GUI console operation error: page exception The graphical user interface console reports an internal error. CMUL00004E GUI console operation error: Java runtime exception The graphical user interface console reports an internal error. 130 CMUL00005E GUI console operation error: GUI not initialized The graphical user interface console reports an internal error. CMUL00009E Invalid value: VALUE_0. Only integer values are allowed. Chapter 5. DS Storage Manager console messages Select OK to run the command. Select Cancel to cancel the operation. Enter an integer value, and then resubmit the task. CMUL00010E VALUE_0: All components of the IP field are required. CMUL00014E Supply values for all the required fields. Not all of the required fields contain information. 132 The value does not fall within the allowed range. Enter values in all the required fields, and then resubmit the task. CMUL00019E Invalid value: VALUE_0 Chapter 5. DS Storage Manager console messages Enter a valid hexadecimal number of the correct length. An integer or decimal number is required. Non numeric characters are invalid. Enter a numeric value, and then resubmit the task. CMUL00023E Value too small: VALUE_0. The value you enter must be greater than VALUE_1 . The entered hexadecimal number is too small. 134 Resubmit the task. If the error persists, contact IBM technical support. Enter a valid hexadecimal number larger than the provided value. CMUL00029E Unauthorized user Page Chapter 6. DS Storage Manager service messages Service messages These messages are issued by the DS Storage Manager. Copyright IBM Corp. 2004, 2005 137 You are being asked to confirm that you want to take the selected hardware resource offline. You are being asked to confirm that you want to bring the selected hardware resource online. CMUR00004E Invalid date entry To Provide a valid date, and then resubmit the task. CMUR00005E Invalid time entry To Chapter 6. DS Storage Manager service messages CMUR00010E The password and confirmation password do not match. 140 Click OK to delete the user accounts. Click Cancel to cancel the operation. Chapter 6. DS Storage Manager service messages CMUR00015E The selected resource cannot be brought online. The task completed normally, but the selected resource is not online. CMUR00016E The attempt to bring the selected resource online does not complete. CMUR00017E The attempt to take the selected resource offline does not complete. None. 142 CMUR00018I Data is being collected for the selected reports. Data collection for the selected reports is taking place. Chapter 6. DS Storage Manager service messages Page Chapter 7. DS storage management console server messages Copyright IBM Corp. 2004, 2005 145 The storage management console server reports an internal error. CMUN00000E SOURCE Authentication failure Provide the correct user name and password, and then resubmit the task. CMUN00005E SOURCE Internal error The storage management console server reports an internal Copy Services failure. 146 Contact IBM technical support for assistance. CMUN00006E SOURCE Internal error CMUN00009E SOURCE Invalid parameter Chapter 7. DS storage management console server messages Contact IBM technical support for assistance. CMUN00010E SOURCE Invalid parameter. CMUN00011E SOURCE Configuration query error CMUN00013E SOURCE Resource not found 148 CMUN00014E SOURCE Server error The storage management console server reports an internal error. Contact IBM technical support for assistance. CMUN00018E SOURCE Unable to connect to the storage management console server Chapter 7. DS storage management console server messages Contact IBM technical support for assistance. CMUN00019E SOURCE Unknown configuration error Contact IBM technical support for assistance. CMUN00022E SOURCE The specified operation is unsupported. 150 This action is supported only for count-key-data volumes. CMUN01000E SOURCE Operation failure Contact IBM technical support for assistance. Contact IBM technical support for assistance. Contact IBM technical support for assistance. Contact IBM technical support for assistance. Contact IBM technical support for assistance. CMUN02005E SOURCE Operation failure: already assigned CMUN02006E SOURCE Unable to query rank 152 CMUN02007E SOURCE Unable to query rank CMUN02008E SOURCE Unable to query logical volume CMUN02010E SOURCE Unable to create array Chapter 7. DS storage management console server messages Contact IBM technical support for assistance. CMUN02011E SOURCE Unable to create array: internal interface communication error Contact IBM technical support for assistance. CMUN02014E SOURCE Cannot delete array. The array is flagged to be serviced. 154 Wait until service is completed on the array, and then resubmit the task. CMUN02015E SOURCE Unable to delete rank: The rank is still assigned. A rank cannot be deleted while it is still in the assigned state. CMUN02019E SOURCE Cannot exceed maximum volume group count Chapter 7. DS storage management console server messages Contact IBM technical support for assistance. Remove unused volume groups, and then resubmit the task. CMUN02020E SOURCE Unable to create logical subsystem: ID already in use. CMUN02023E SOURCE Unable to modify logical subsystem: cannot set session timeout 156 Specify a valid timeout value, and then resubmit the task. CMUN02024E SOURCE Unable to modify logical subsystem: invalid critical mode enabled CMUN02025E SOURCE Unable to modify logical subsystem: invalid extended long busy enabled CMUN02027E SOURCE Unable to modify logical subsystem: cannot set session timeout Chapter 7. DS storage management console server messages CMUN02028E SOURCE Cannot use array sites. These sites are flagged to be serviced. CMUN02029E SOURCE Internal error Contact IBM technical support for assistance. CMUN02032E SOURCE Unable to create logical volume Contact IBM technical support for assistance. 158 Contact IBM technical support for assistance. Contact IBM technical support for assistance. CMUN02036E SOURCE Unable to delete array Chapter 7. DS storage management console server messages Contact IBM technical support for assistance. CMUN02037E SOURCE Unable to delete array Contact IBM technical support for assistance. CMUN02041E SOURCE Unable to create logical subsystem: device type must be CKD The specified device type must be count-key-data. 160 CMUN02042E SOURCE Operation failure: configuration already exists You are attempting to create a configuration that already exists. CMUN02046E SOURCE Operation failure: unable to allocate memory CMUN02047E SOURCE Operation failure Chapter 7. DS storage management console server messages CMUN02048E SOURCE Operation failure CMUN02049E SOURCE Rank reconfiguration failure: memory allocation error CMUN02051E SOURCE Unable to repair array 162 Contact IBM technical support for assistance. CMUN02052E SOURCE Storage unit unavailable An invalid or unknown storage unit is specified. CMUN02056E SOURCE Operation failure: unable to allocate memory Chapter 7. DS storage management console server messages Contact IBM technical support for assistance. CMUN02057E SOURCE Unable to assign rank to extent pool: The rank is already assigned. Unassign the rank or specify an unassigned rank, and then resubmit the task. CMUN02060E SOURCE Unable to create extent pool 164 Specify a unique worldwide port name, and then resubmit the task. Contact IBM technical support for assistance. CMUN02061E SOURCE Create logical subsystem failure CMUN02065E SOURCE Operation failure: device adapter cannot query data Chapter 7. DS storage management console server messages The port profile length cannot be more than 16 characters. CMUN02066E SOURCE Operation failure: database creation error Contact IBM technical support for assistance. CMUN02070E SOURCE Unable to create SCSI host port: invalid WWPN Contact IBM technical support for assistance. 166 CMUN02071E SOURCE Unable to create SCSI host port: invalid WWPN CMUN02072E SOURCE Unable to create SCSI host port: invalid override default priority CMUN02074E SOURCE Unable to create volume group: invalid user name The specified user name is longer than the 16-character maximum length. Chapter 7. DS storage management console server messages Contact IBM technical support for assistance. Specify a valid user name, and then resubmit the task. CMUN02079E SOURCE Operation failure 168 Contact IBM technical support for assistance. CMUN02080E SOURCE Unable to create array: The maximum number of arrays have been created. CMUN02081E SOURCE Unable to create rank: The maximum number of ranks have been created. CMUN02084E SOURCE Unable to delete extent pool CMUN02085E SOURCE Unable to delete extent pool Chapter 7. DS storage management console server messages CMUN02086E SOURCE Unable to delete logical volume CMUN02087E SOURCE Unable to query rank CMUN02089E SOURCE Failed to initialize LPAR CMUN02090E SOURCE LPAR startup error 170 CMUN02091E SOURCE Failed to initialize LPAR CMUN02092E SOURCE Rank creation cannot complete CMUN02094E SOURCE Failed to initialize LPAR CMUN02095E SOURCE Unable to create logical volume Chapter 7. DS storage management console server messages CMUN02096E SOURCE Unable to create logical volume CMUN02097E SOURCE Unable to query rank CMUN02099E SOURCE Unable to create volume group CMUN02100E SOURCE Volume group operation failure 172 CMUN02101E SOURCE Unable to query volume group CMUN02102E SOURCE Unable to delete logical volume CMUN02104E SOURCE Unable to assign volume to volume group Chapter 7. DS storage management console server messages This volume group is internally reserved and cannot be modified. Contact IBM technical support for assistance. CMUN02105E SOURCE Unable to retrieve volumes assigned to volume group CMUN02109E SOURCE Unable to modify SCSI host port 174 Contact IBM technical support for assistance. CMUN02110E SOURCE Unable to modify SCSI host port: invalid address discovery method Specify a valid address discovery method, and then resubmit the task. CMUN02114E SOURCE Unable to modify SCSI host port: invalid logical block size Specify a valid logical block size, and then resubmit the task. CMUN02116E SOURCE Unable to modify SCSI host port: invalid port mask CMUN02117E SOURCE Unable to modify SCSI host port: invalid override default priority value 176 CMUN02118E SOURCE Unable to modify SCSI host port: invalid port profile The port profile length cannot be more than 16 characters. CMUN02119E SOURCE Unable to modify SCSI host port: invalid port topology CMUN02122E SOURCE Unable to modify SCSI host port: invalid value CMUN02123E SOURCE Unable to modify SCSI host port: nonexistent volume group The specified volume group does not exist. CMUN02124E SOURCE Unable to modify SCSI host port Contact IBM technical support for assistance. CMUN02126E SOURCE Unable to repair array CMUN02127E SOURCE Unable to modify volume group 178 CMUN02128E SOURCE Unable to open a session to query a logical volume CMUN02129E SOURCE Unable to open a session CMUN02132E SOURCE Rank creation cannot complete. Contact IBM technical support for assistance. CMUN02133E SOURCE Extent pool operation failure CMUN02134E SOURCE Rank operation failure CMUN02135E SOURCE Volume group query failure 180 Contact IBM technical support for assistance. CMUN02136E SOURCE Unable to query volume groups: invalid volume number CMUN02137E SOURCE Unable to assign rank to extent pool: type mismatch CMUN02140E SOURCE Unable to create rank Chapter 7. DS storage management console server messages Contact IBM technical support for assistance. CMUN02141E SOURCE Rank creation failure: check device adapter CMUN02142E SOURCE Rank creation did not complete. CMUN02145E SOURCE Unable to create rank 182 Contact IBM technical support for assistance. CMUN02146E SOURCE Rank creation failure: server unavailable Contact IBM technical support for assistance. CMUN02150E SOURCE Unable to delete rank CMUN02151E SOURCE Unable to delete rank Chapter 7. DS storage management console server messages CMUN02152E SOURCE Rank operation failure CMUN02153E SOURCE Rank operation failure CMUN02155E SOURCE Rank operation failure: device adapter error CMUN02156E SOURCE Unable to reconfigure rank 184 CMUN02157E SOURCE Unable to reconfigure rank CMUN02158E SOURCE Unable to reconfigure rank: server offline CMUN02159E SOURCE Rank reconfiguration failure: The rank is flagged to be serviced. Chapter 7. DS storage management console server messages CMUN02160E SOURCE Unable to reconfigure rank Contact IBM technical support for assistance. CMUN02161E SOURCE Unable to release rank CMUN02164E SOURCE Rank operation failure 186 Contact IBM technical support for assistance. CMUN02165E SOURCE Unable to unassign rank Contact IBM technical support for assistance. CMUN02169E SOURCE Unable to assign volume to volume group Contact IBM technical support for assistance. CMUN02170E SOURCE Unable to assign volume to volume group Contact IBM technical support for assistance. CMUN02171E SOURCE Unable to assign volumes to volume group CMUN02173E SOURCE Unable to assign volume to volume group: data type mismatch 188 Specify compatible data types, and then resubmit the task. CMUN02174E SOURCE Unable to assign volume to volume group Contact IBM technical support for assistance. CMUN02178E SOURCE Unable to reset Copy Services settings on logical subsystems Chapter 7. DS storage management console server messages Contact IBM technical support for assistance. CMUN02179E SOURCE Unable to reset Copy Services settings on logical subsystem Contact IBM technical support for assistance. CMUN02183E SOURCE Unable to modify SCSI host port CMUN02184E SOURCE Unable to modify SCSI host port 190 CMUN02185E SOURCE Unable to retrieve volumes assigned to the volume group CMUN02186E SOURCE Unable to retrieve volumes assigned to volume group CMUN02187E SOURCE Unable to retrieve volumes assigned to the volume group: no ranks exist No ranks exist on the storage image. Volume information is not available. Chapter 7. DS storage management console server messages CMUN02188E SOURCE Unable to retrieve volumes assigned to volume group. Contact IBM technical support for assistance. CMUN02192E SOURCE Unable to query rank 192 Contact IBM technical support for assistance. CMUN02193E SOURCE Operation failure Contact IBM technical support for assistance. CMUN02197E SOURCE Unable to modify SCSI host port: invalid port profile Chapter 7. DS storage management console server messages Contact IBM technical support for assistance. The port profile is not a supported port profile. Specify a valid and supported port profile, and then resubmit the task. CMUN02201E SOURCE Unable to assign volumes to volume group CMUN02202E SOURCE Unable to assign volumes to volume group 194 CMUN02203E SOURCE Unable to create, modify, or delete volume group: version update CMUN02204E SOURCE Volume group query failure CMUN02206E SOURCE Unable to unassign rank Chapter 7. DS storage management console server messages CMUN02207E SOURCE Unable to unassign rank Contact IBM technical support for assistance. CMUN02208E SOURCE Unable to unassign rank: Extents are allocated to logical volumes. CMUN02211E SOURCE Unable to delete volume group 196 Contact IBM technical support for assistance. Unassign the volume group from the host ports, and then resubmit the task. CMUN02213E SOURCE Unable to delete volume group CMUN02216E SOURCE Unable to modify volume group CMUN02217E SOURCE Operation failure Chapter 7. DS storage management console server messages CMUN02218E SOURCE Operation failure CMUN02219E SOURCE Unable to create or delete volume group: local server offline CMUN02222E SOURCE Operation failure CMUN02223E SOURCE Unable to repair array CMUN02224E SOURCE Unable to create volume group: invalid volume group type Chapter 7. DS storage management console server messages Specify a valid volume group type, and then resubmit the task. CMUN02225E SOURCE Unable to assign rank to extent pool Contact IBM technical support for assistance. CMUN02228E SOURCE Rank creation cannot complete. 200 CMUN02230E SOURCE Rank definition failure: extent type mismatch CMUN02232E SOURCE Unable to create logical subsystem: device type mismatch Chapter 7. DS storage management console server messages CMUN02234E SOURCE Unable to create logical subsystem: device type format error The device type length must be less than 4 characters. CMUN02235E SOURCE Unable to create or modify logical subsystem: invalid format CMUN02236E SOURCE Unable to create or modify logical subsystem: invalid format A logical subsystem identifier must be 2 hexadecimal characters. 202 CMUN02237E SOURCE Unable to create array: The RAID type is neither RAID5 nor RAID10. The RAID type must be either RAID5 or RAID10. CMUN02240E SOURCE Unable to create logical volume: invalid volume type The specification contains an invalid volume type. Chapter 7. DS storage management console server messages CMUN02241E SOURCE Service intent is not currently set. Reset ignored. Contact IBM technical support for assistance. CMUN02245E SOURCE Unable to create extent pool: invalid extent limit enabled value 204 CMUN02246E SOURCE Unable to create extent pool: invalid extent limit CMUN02247E SOURCE Unable to create extent pool: invalid extent threshold CMUN02248E SOURCE Unable to modify extent pool: invalid extent threshold CMUN02249E SOURCE Unable to create extent pool: invalid extent type The specification contains an invalid extent type. Chapter 7. DS storage management console server messages Specify a valid extent type, and then resubmit the task. CMUN02250E SOURCE Unable to create or modify extent pool: invalid user name CMUN02253E SOURCE Unable to start or end service: invalid storage management console ID 206 A logical subsystem ID is a hexadecimal value of the range (0 - FF). Contact IBM technical support for assistance. CMUN02254E SOURCE Unable to create or modify logical volume: invalid user name CMUN02258E SOURCE Unable to delete extent pool: ranks are assigned Chapter 7. DS storage management console server messages Unassign the ranks, and then resubmit the task. CMUN02259E SOURCE Unable to start or end service: invalid parameters Contact IBM technical support for assistance. CMUN02262E SOURCE Unable to create volumes: invalid volume type 208 CMUN02263E SOURCE Unable to create or delete extent pool: local server offline CMUN02264E SOURCE Unable to end service: lock still held by other management console CMUN02265E SOURCE Logical volume operation failure: not supported Chapter 7. DS storage management console server messages CMUN02266E SOURCE Unable to modify logical subsystem: not a CKD volume CMUN02267E SOURCE Unable to create or modify logical subsystem: identifier already in use CMUN02268E SOURCE Unable to create or modify logical subsystem: identifier must be nonzero CMUN02269E SOURCE Unable to modify logical subsystem: identifier only for CKD 210 Contact IBM technical support for assistance. CMUN02270E SOURCE Unable to create a new SCSI host port: maximum count reached CMUN02271E SOURCE Unable to create SCSI host port CMUN02273E SOURCE Unable to modify SCSI host port Chapter 7. DS storage management console server messages A logical subsystem must exist before multiple alias volumes can be created. Contact IBM technical support for assistance. CMUN02274E SOURCE Unable to delete SCSI host port CMUN02278E SOURCE Operation failure: name is not unique Contact IBM technical support for assistance. 212 The specification contains a name that is already being used. CMUN02279E SOURCE Operation failure: unknown storage unit CMUN02283E SOURCE Unable to create CKD alias logical volume: no base volume exists. CMUN02284E SOURCE Logical subsystem operation failure: logical subsystem does not exist. The specification contains a reference to a nonexistent logical subsystem. CMUN02285E SOURCE Unable to create rank: array does not exist. The specification contains a reference to a nonexistent array. CMUN02286E SOURCE Rank operation failure: extent pool does not exist. The specification contains a reference to a nonexistent extent pool. 214 The specification contains a reference to a nonexistent extent pool. CMUN02287E SOURCE Rank operation failure: rank does not exist. CMUN02291E SOURCE Unable to start service: device adapter pair is configuring. Chapter 7. DS storage management console server messages Wait until the device configuration completes, and then resubmit the task. CMUN02292E SOURCE XML parse error Contact IBM technical support for assistance. CMUN02296E SOURCE Unable to delete logical volume The logical volume specification does not contain a requested capacity. 216 Contact IBM technical support for assistance. CMUN02297E SOURCE Unable to create logical volume: FB volumes must have a data type. CMUN02300E SOURCE Rank operation failure Chapter 7. DS storage management console server messages Contact IBM technical support for assistance. CMUN02301E SOURCE Rank operation failure Contact IBM technical support for assistance. CMUN02305E SOURCE Operation failure: SCSI host port already exists. The specified SCSI host port already exists. 218 Specify a new SCSI host port, and then resubmit the task. CMUN02307E SOURCE Unable to create logical volume CMUN02309E SOURCE Unable to modify logical volume: volume type and data type mismatch Chapter 7. DS storage management console server messages Contact IBM technical support for assistance. CMUN02310E SOURCE Unable to add logical volume to volume group Contact IBM technical support for assistance. CMUN02314E SOURCE Unable to modify logical volume 220 Contact IBM technical support for assistance. CMUN02315E SOURCE Unable to modify logical subsystem Contact IBM technical support for assistance. CMUN02319E SOURCE Unable to repair array Chapter 7. DS storage management console server messages Contact IBM technical support for assistance. CMUN02320E SOURCE Unable to create rank: Service intent is set on the array. Wait until service is completed on the array, and then resubmit the task. CMUN02324E SOURCE Unable to assign rank to extent pool: Service intent is set. CMUN02325E SOURCE Unable to create rank: not in dual server mode CMUN02326E SOURCE Unable to release rank: Service intent is set. CMUN02327E SOURCE Unable to reserve rank: Service intent is set. Chapter 7. DS storage management console server messages CMUN02328E SOURCE Unable to unassign rank: Service intent is set. CMUN02329E SOURCE Unable to delete rank: not in dual server mode CMUN02330E SOURCE Unable to repair array: Service intent is set. CMUN02332E SOURCE Unable to delete rank 224 Contact IBM technical support for assistance. CMUN02333E SOURCE Unable to delete rank: Service intent is set. CMUN02334E SOURCE Unable to unfence volume through rank: Service intent is set. CMUN02336E SOURCE Unable to rebuild array Contact IBM technical support for assistance. CMUN02338E SOURCE Delete SCSI host port operation stopped. Previous attempt failed. Contact IBM technical support for assistance. CMUN02339E SOURCE Delete volume group operation stopped. Previous attempt failed. CMUN02340E SOURCE Array site operation failure: The array site is used in another array. The specified array site is used in other array. 226 CMUN02341E SOURCE Logical subsystem configuration error Contact IBM technical support for assistance. CMUN02344E SOURCE Unable to delete logical subsystem: local server offline Chapter 7. DS storage management console server messages CMUN02345E SOURCE Unable to create logical volume: local server offline CMUN02346E SOURCE Unable to create logical volume: logical subsystem not in correct state Contact IBM technical support for assistance. CMUN02348E SOURCE Operation failure: logical subsystem not in correct state 228 Contact IBM technical support for assistance. CMUN02349E SOURCE Unable to modify logical volume: incorrect state Contact IBM technical support for assistance. CMUN02353E SOURCE Operation failure Chapter 7. DS storage management console server messages Contact IBM technical support for assistance. CMUN02354E SOURCE Operation failure Contact IBM technical support for assistance. CMUN02357E SOURCE Unable to create SCSI host port: invalid user host name 230 CMUN02358E SOURCE Unable to modify SCSI host port: invalid user host description CMUN02359E SOURCE Unable to modify SCSI host port: invalid user host name CMUN02360E SOURCE Unable to add logical volume to volume group: invalid parameter CMUN02361E SOURCE Unable to modify volume group: invalid user name Chapter 7. DS storage management console server messages CMUN02362E SOURCE Unable to query volume groups: incorrect volume configuration Contact IBM technical support for assistance. CMUN02363E SOURCE Unable to query volume groups: invalid parameter CMUN02366E SOURCE Volume group operation failure: local server offline CMUN02367E SOURCE Volume group operation failure: incorrect volume configuration 232 CMUN02368E SOURCE Volume group operation failure: volume does not exist CMUN02369E SOURCE Volume group operation failure CMUN02370E SOURCE Volume group operation failure: incorrect volume configuration CMUN02371E SOURCE Volume group operation failure: invalid parameter Chapter 7. DS storage management console server messages CMUN02372E SOURCE Volume group operation failure: volume does not exist CMUN02373E SOURCE Volume group operation failure: invalid parameter CMUN02375E SOURCE Volume group operation failure Correct the specification, and then resubmit the task. 234 Contact IBM technical support for assistance. CMUN02376E SOURCE Unable to modify logical volume: invalid data type CMUN02379E SOURCE Error: A volume of this type cannot have a base logical volume number. Chapter 7. DS storage management console server messages Correct the specification, and then resubmit the task. CMUN02380E SOURCE Unable to create array. Array sites must be in the same loop. Specify arrays that are in the same loop, and then resubmit the task. CMUN02384E SOURCE Operation failure: invalid file type Specify one or two array sites, and then resubmit the task. 236 Contact IBM technical support for assistance. CMUN02385E SOURCE Unable to modify network port: The specified IP address is invalid. CMUN02388E Invalid logical volume size. See the help text for this message for valid sizes. 238 Page 240 Chapter 7. DS storage management console server messages 242 Chapter 7. DS storage management console server messages 244 Chapter 7. DS storage management console server messages 246 Chapter 7. DS storage management console server messages 248 Chapter 7. DS storage management console server messages 250 Chapter 7. DS storage management console server messages 252 Chapter 7. DS storage management console server messages 254 Chapter 7. DS storage management console server messages Specify a valid volume size and then resubmit the task. CMUN02389E SOURCE Unable to create volume. Not enough extents are available. Specify a valid volume group, and then resubmit the task. 256 Add more extents to the extent pool, and then resubmit the task. CMUN02390E SOURCE Unable to create volume. Not enough extents are available at this time. CMUN02396E SOURCE Contact information must be entered before you can invoke call home. CMUN02397E SOURCE Unable to delete volume: The volume does not exist. The specified volume cannot be found. Therefore, it cannot be deleted. 258 Specify a different volume to delete. CMUN02398E SOURCE Unable to create array. All array sites must be in the same loop. CMUN02402E SOURCE Unable to create rank: failed disk drives detected Chapter 7. DS storage management console server messages CMUN02403E SOURCE Unable to create rank: not a licensed operation Your current license does not permit you to create the rank. Obtain and install the appropriate license key, and then resubmit the task. CMUN02406E SOURCE Internal logical configuration error: Collect a PE package. 260 Contact IBM technical support for assistance. Collect a PE package and contact IBM technical support for assistance. CMUN02407E SOURCE Array operation failure: Resource Manager not available on alternate server Chapter 7. DS storage management console server messages 262 Omit the colon, and then resubmit the task. Omit the colon, and then resubmit the task. CMUN02416E SOURCE Rank repair operation failure Contact IBM technical support for assistance. CMUN02417E SOURCE Rank repair operation failure Contact IBM technical support for assistance. CMUN02419E SOURCE Rank repair operation failure: Service intent flag is set. CMUN02420E SOURCE Rank repair operation failure Chapter 7. DS storage management console server messages CMUN02422E SOURCE Rank repair operation failure: Unable to retrieve adapter name. CMUN02423E SOURCE Rank repair operation failure: device adapter error 264 CMUN02425E SOURCE Rank repair operation failure: Unable to delete RAID array. CMUN02426E SOURCE Rank repair operation failure: Unable to retrieve serial number. CMUN02427E SOURCE Internal logical configuration error: Another configuration is in progress. Chapter 7. DS storage management console server messages CMUN02428E SOURCE Unable to create rank. Disks are being formatted. The rank cannot be created until disk reformatting completes. CMUN02429E SOURCE A recovery is in progress. Logical configuration commands are blocked. CMUN02432E SOURCE Invalid configuration: volume group and volume type mismatch Specify logical volumes of the correct type, and then resubmit the task. CMUN02433E SOURCE Invalid configuration: 512-byte fixed-block volumes must share data. CMUN02434E SOURCE Invalid configuration: volume group and volume type mismatch CMUN02435E SOURCE Invalid configuration: volume group and volume type mismatch Chapter 7. DS storage management console server messages Specify only 520-byte fixed block logical volumes, and then resubmit the task. Specify only 512-byte fixed-block logical volumes, and then resubmit the task. CMUN02436E SOURCE Invalid configuration: volume group and volume type mismatch CMUN02439E SOURCE Unable to create rank. DDM repair is required or in progress. 268 Wait until the drives have been repaired, and then resubmit the task. CMUN03000E SOURCE Operation failure: action cancelled due to lack of resources Contact IBM technical support for assistance. CMUN03004E SOURCE Copy Services operation failure: Global Mirror command not properly defined Chapter 7. DS storage management console server messages The storage management console server reports a Copy Services error. Contact IBM technical support for assistance. CMUN03005E SOURCE Copy Services operation failure: Global Mirror feature not installed CMUN03008E SOURCE Copy Services operation failure: cascading FlashCopy prohibited 270 CMUN03009E SOURCE Copy Services operation failure: cascading primary A cascading primary logical volume cannot be in a Global Mirror relationship. CMUN03010E SOURCE Copy Services operation failure: cascading secondary noncascade CMUN03012E SOURCE Remote Mirror and Copy operation failure Chapter 7. DS storage management console server messages Contact IBM technical support for assistance. CMUN03013E SOURCE CKD management is disabled. Management of count-key-data resources on the storage unit is disabled. CMUN03016E SOURCE Copy Services feature not installed The Copy Services feature is not installed on the storage unit. 272 Contact IBM technical support for assistance. CMUN03017E SOURCE Copy Services feature not supported. CMUN03021E SOURCE Copy Services operation failure: device status cannot be determined Chapter 7. DS storage management console server messages Contact IBM technical support for assistance. CMUN03022E SOURCE Copy Services operation failure: source is destination Specify two distinct ports, and then resubmit the task. CMUN03024E SOURCE Copy Services operation failure: ESCON - FCP remove collision 274 One of the following is taking place: Contact IBM technical support for assistance. CMUN03025E SOURCE Copy Services operation failure: storage image not available CMUN03029E SOURCE Copy Services operation failure: invalid failback primary Specify the correct primary, and then resubmit the task. CMUN03030E SOURCE Copy Services operation failure: failback primary volume not suspended Suspend the failback primary volume, and then resubmit the task. CMUN03031E SOURCE Copy Services operation failure: invalid failover primary site CMUN03032E SOURCE Operation failure: invalid failover secondary volume 276 License and install the feature, and then resubmit the task. CMUN03033E SOURCE Copy Services operation failure: FCP - FICON path collision You are attempting to establish an FCP path on a port with existing FICON logical paths. CMUN03037E SOURCE Copy Services operation failure: FlashCopy inhibited FlashCopy is inhibited on this volume. Contact IBM technical support for assistance. CMUN03038E SOURCE Copy Services operation failure: Volume is already a FlashCopy target. Specify a different target logical volume, and then resubmit the task. CMUN03040E SOURCE Copy Services operation failure: maximum relationships exceeded 278 Remove any unwanted relationships, and then resubmit the task. CMUN03041E SOURCE Copy Services operation failure: already a FlashCopy source Specify a different logical volume, and then resubmit the task. CMUN03045E SOURCE Copy Services operation failure: increment failed due to internal error Chapter 7. DS storage management console server messages Specify a different target, and then resubmit the task. The relationship cannot be incremented due to an internal error. Contact IBM technical support for assistance. CMUN03049E SOURCE Copy Services operation failure: incompatible volumes 280 Contact IBM technical support for assistance. CMUN03050E SOURCE Copy Services operation failure: invalid FlashCopy extent The FlashCopy operation does not allow the specification of extents. CMUN03053E SOURCE Copy Services operation failure: invalid transition The command attempts to perform an invalid transition between modes. Chapter 7. DS storage management console server messages Contact IBM technical support for assistance. CMUN03054E SOURCE Copy Services operation failure: invalid revertible specification CMUN03057E SOURCE Copy Services operation failure: invalid subsystem ID The specified subsystem ID cannot be found. 282 Contact IBM technical support for assistance. Specify an valid subsystem ID, and then resubmit the task. CMUN03062E SOURCE Copy Services operation failure: maximum masters exceeded Chapter 7. DS storage management console server messages Specify a valid Remote Mirror and Copy pair, and then resubmit the task. Contact IBM technical support for assistance. CMUN03063E SOURCE Copy Services operation failure: sequence number and session ID mismatch CMUN03067E SOURCE Copy Services operation failure: configuration does not exist CMUN03068E SOURCE Copy Services operation failure: not ready for resync Suspend the volumes, and then resubmit the task. CMUN03069E SOURCE Pair capacity mismatch CMUN03070E SOURCE Copy Services operation failure: pairs remain CMUN03071E SOURCE Copy Services operation failure: invalid parameter Chapter 7. DS storage management console server messages The storage management console server reports a Copy Services error. Contact IBM technical support for assistance. CMUN03072E SOURCE Copy Services operation failure: invalid track CMUN03075E SOURCE Copy Services operation failure: path timeout 286 Contact IBM technical support for assistance. CMUN03076E SOURCE Operation failure: path type mismatch Contact IBM technical support for assistance. CMUN03079E SOURCE Copy Services operation failure: copy pending Chapter 7. DS storage management console server messages Contact IBM technical support for assistance. CMUN03080E SOURCE Copy Services: recovery command rejected None. CMUN03083E SOURCE Copy Services operation failure: preexisting Remote Mirror and Copy pair 288 Specify a different volume, and then resubmit the task. Contact IBM technical support for assistance. CMUN03084E SOURCE Copy Services operation failure: busy CMUN03087E SOURCE Copy Services operation failure: reverse bitmap non-zero Chapter 7. DS storage management console server messages Contact IBM technical support for assistance. CMUN03088E SOURCE Copy Services operation failure: secondary error Contact IBM technical support for assistance. CMUN03091E SOURCE Copy Services operation failure: session members not defined 290 Contact IBM technical support for assistance. CMUN03092E SOURCE Copy Services operation failure: session not open The session that is specified for member management is not open. CMUN03095E SOURCE Copy Services operation failure: subordinate count out of range Chapter 7. DS storage management console server messages Contact IBM technical support for assistance. CMUN03096E SOURCE Copy Services operation failure: target online The target volume is online to a host. CMUN03100E SOURCE Copy Services operation failure: volume in session The specified volume is already associated with a session. 292 Specify a different volume, and then resubmit the task. CMUN03101E SOURCE Copy Services operation failure: volume in use CMUN03105E SOURCE Copy Services operation failure: volume not restorable Chapter 7. DS storage management console server messages Specify known volumes, and then resubmit the task. Contact IBM technical support for assistance. CMUN03106E SOURCE Copy Services operation failure: volume reserved CMUN03109E SOURCE Copy Services operation failure: volumes not simplex 294 Contact IBM technical support for assistance. CMUN03110E SOURCE Copy Services operation failure: warm start occurred Contact IBM technical support for assistance. CMUN03113E SOURCE Operation failure: CKD base required Chapter 7. DS storage management console server messages The pair cannot be established until intialization completes. Specify a CKD base device, and then resubmit the task. CMUN03114E SOURCE Unable to establish FlashCopy with fast reverse restore: previous FRR CMUN03118E SOURCE Copy Services error: Intervention is required. Contact IBM technical support for assistance. 296 One of the following conditions exists: v v v The storage management console server reports a hardware error. CMUN04002E SOURCE Operation failure: internal error Chapter 7. DS storage management console server messages Contact IBM technical support for assistance. CMUN04003E SOURCE Operation failure: internal error The storage management console server reports an internal error. CMUN04007E SOURCE Operation failure: resource not found The storage management console server reports an internal error. 298 Contact IBM technical support for assistance. CMUN04008E SOURCE Operation failure CMUN05002E SOURCE Operation failure: duplicate user name in local repository The storage management console server reports an internal security error. Chapter 7. DS storage management console server messages Specify a valid user account name, and then resubmit the task. Contact IBM technical support for assistance. CMUN05007E SOURCE Operation failure: local busy 300 CMUN05008E SOURCE Operation failure The storage management console server reports an internal security error. Contact IBM technical support for assistance. CMUN05013E SOURCE Operation failure: password same as previous password A user account password cannot be used again. CMUN05014E SOURCE Operation failure: alternate repository not accessible The storage management console server reports an internal security error. Contact IBM technical support for assistance. CMUN05017E SOURCE Operation failure: internal error in alternate repository The storage management console server reports an internal security error. 302 The specified user name cannot be found in the alternate repository. Contact IBM technical support for assistance. CMUN05022E SOURCE Operation failure: user not found in local repository Chapter 7. DS storage management console server messages Contact IBM technical support for assistance. The specified user name cannot be found in the local repository. CMUN06000E SOURCE Operation failure: unable to connect CMUN06003E SOURCE Operation failure: unable to copy PE package The storage management console server reports an internal service advisor error. 304 Contact IBM technical support for assistance. CMUN06004E SOURCE Operation failure: unable to copy SA logs to the PE package CMUN06008E SOURCE Operation failure: console server exception returned to SA CMUN06009E SOURCE Operation failure: unable to retrieve list of field-replacable units Chapter 7. DS storage management console server messages CMUN06010E SOURCE Operation failure: unable to retrieve list of network ports CMUN06011E SOURCE Operation failure: unable to retrieve password CMUN06013E SOURCE Operation failure: unable to retrieve software version The storage management console server reports an internal service advisor error. 306 Contact IBM technical support for assistance. CMUN06014E SOURCE Operation failure: unable to retrieve trace service CMUN06018E SOURCE Unable to activate code load: incompatible hardware and code versions Chapter 7. DS storage management console server messages CMUN06020E SOURCE Operation failure: invalid code bundle CMUN06021E SOURCE Operation failure: invalid file or directory v CMUN06022E SOURCE Operation failure: unable to load code bundle 308 CMUN06023E SOURCE Operation failure: unable to mark state save The storage management console server reports an internal service advisor error. Contact IBM technical support for assistance. CMUN06026E SOURCE Operation failure: an external utility does not run The utility might not run for one of the following reasons: v moved. v v Chapter 7. DS storage management console server messages CMUN06027E SOURCE Operation failure: thread interupted Contact IBM technical support for assistance. CMUN06030E SOURCE Operation failure: environment variable not found 310 CMUN06031E SOURCE Operation failure: unable to compress all files to zip file The storage management console server reports an internal service advisor error. Contact IBM technical support for assistance. CMUN80003E Information for this resource cannot be retrieved. CMUN80004E The resource cannot be created. CMUN80005E An error occurs while committing configuration changes. CMUN80006E The information for this resource cannot be retrieved. 312 You are attempting to perform an action for which you have no authorization. CMUN80007E Information for this resource cannot be retrieved. No specific information about the cause of the failure is available. CMUN80011E The connection cannot be made because authentication information is invalid. Chapter 7. DS storage management console server messages The authentication information is invalid. Ensure that correct authentication information is entered. Resubmit the task. CMUN80012E The IP address of the host cannot be determined. CMUN80015E Resource not found The storage management console server cannot find the specified resource. 314 CMUN80016E The storage management console server reports an internal error. The storage management console server reports an internal error. CMUN80019E SOURCE Authentication failure: The security database is not accessible. Chapter 7. DS storage management console server messages Contact IBM technical support for assistance. CMUN80020E SOURCE Authentication failure: invalid password Specify a valid password, and then resubmit the task. CMUN80023E SOURCE Authentication failure: Nonexistent account. 316 CMUN80024E SOURCE Authorization failure: You are not authorized to run this task. Accessibility Copyright IBM Corp. 2004, 2005 317 Features Navigating by keyboard Accessing the publications Page Notices Copyright IBM Corp. 2004, 2005 319 Terms and conditions for downloading and printing publications 320 Trademarks Electronic emission notices 322 Federal Communications Commission (FCC) statement Industry Canada compliance statement European community compliance statement Japanese Voluntary Control Council for Interference (VCCI) class A statement Korean Ministry of Information and Communication (MIC) statement Taiwan class A compliance statement 324 Glossary Copyright IBM Corp. 2004, 2005 325 A access 1) To obtain the use of a computer resource. 326 B Glossary 327 2) The storage medium required to store eight bits. See also bit. C 328 Glossary 329 D 330 Glossary 331 2) A disk device. 2) In TCP/IP, the naming system used in hierarchical networks. E 332 Glossary 333 F 334 Glossary 335 gigabyte of memory is 2 G H 336 I Glossary 337 338 J Glossary 339 K bytes. L 340 M Glossary 341 342 576 bytes. N Glossary 343 NVS See nonvolatile storage. O P 344 Glossary 345 R S 346 Glossary 347 348 Glossary 349 T 350 Glossary 351 U V W X 352 Z