Avaya P130 manual Set spantree Commands, Set spantree priority Command, Set port spantree Command

Chapter 6 Avaya P130 CLI

Set spantree Commands

Use the set spantree command to enable/disable the spanning-tree protocol for the P130 switch.

The syntax for this command is:

set spantree {enabledisable}

Example:

P130-1# set spantree enable bridge spanning tree enabled.

Set spantree priority Command

Use the set spantree priority command to set the bridge priority for STP.

The syntax for this command is:

set spantree priority <bridge_priority>

bridge_priority Number representing the priority of the bridge.

The priority level is from 0 to 65535, with 0 indicating high priority and 65535 indicating low priority.

Example:

To set the bridge priority to 45000:

P130-1# set spantree priority 45000

Bridge priority set to 45000.

Set port spantree Command

Use the set port spantree command to enable/disable the spanning-tree protocol for a specific port.

The syntax for this command is:

set port spantree {enabledisable}[module/port]

Example:

P130-1# set port spantree enable 1/2

84 Avaya P130 User’s Guide