Chapter 6 Avaya P130 CLI
Show tftp download software status Command
Use the show tftp download software status commands to display the status of the current TFTP Device Manager S/W (Embedded Web) download process into the device.
The syntax for this command is:
show tftp download software status [<mod_num>]
<mod_num> Module number
Example:
P130-N> show tftp download software status
Module | : | 1 |
Source file | : /home2/users/vkopilev/work/P130/brs_integr/ | |
bsp_64115/vxWorks. |
| |
st_appl.bout.burn |
| |
Destination file : | p130 | |
Host | : 149.49.39.76 | |
Running state | : Idle | |
Failure display | : (null) | |
Last warning | : | |
Copy stack-config tftp Command
Use the copy
The syntax for this command is:
copy stack-config tftp <filename> <ip>
<filename> | File name (full path) |
<ip> | The IP address of the host |
Example:
P130-1# copy stack-config tftp c:\conf.cfg 149.49.36.200
Beginning upload operation ...
This operation may take a few minutes...
Please refrain from any other operation during this time.
For more information , use 'show tftp upload status' command
58 | Avaya P130 User’s Guide |
