Avaya P130 Show interface Command, Set interface Command, Set interface namevlanipaddrnetmask

Chapter 6 Avaya P130 CLI

Show interface Command

Use the show interface command to display information on the management interfaces.

The syntax for this command is:

show interface [{ppp inband}]

Example:
P130-N> show interface
Interface Name	VLAN	IP address	Netmask
--------------	----	---------------	---------------
inband	1	149.49.34.211	255.255.255.0
ppp	1	0.0.0.0	0.0.0.0

Set interface Command

Use the set interface command to configure the in-band interfaces on the switch.

The syntax for this command is:

set interface [name][vlan][ip_addr][netmask]

name	Interface name ("inband" used for Master agent)
vlan	The number of the VLAN to be assigned to the interface
ip_addr	IP address
netmask	Subnet mask

Show log Command

Use the show log command to display Log files of all modules or of a specific module.

The syntax for this command is:

show log [<module>[-<last module>]]

[<module>[-<last module>]] One or more module numbers

Avaya P130 User’s Guide 49