Avaya P130 manual Set port auto-negotiation-flowcontrol-advertisement Command

Chapter 6 Avaya P130 CLI

Example:

These examples show how to use the set port flowcontrol command set:

P130-1# set flowcontrol receive 5/1 on

Port 5/1 flow control receive administration status set to on (port will require far end to send flowcontrol)

P130-1#

P130-1# set flowcontrol send 5/1 off

Port 5/1 flow control send administration status set to off (port will send flowcontrol to far end)

P130-1#

Set port auto-negotiation-flowcontrol-advertisement Command

Use the set auto-negotiation-flowcontrol-advertisement command to set the flowcontrol advertisement for a Gigabit port when performing autonegotiation.

The syntax for this command is:

set port auto-negotiation-flowcontrol-advertisement

<mod_num>/<port_num> {no-flowcontrol asym-tx-only sym-only sym-and-asym-rx}

mod_num port_num no-flowcontrol asym-tx-only sym-only

sym-and- asym-rx

Module number

Number of the port on the module

The port will advertise no pause capabilities

The port will advertise asymmetric Tx pause capabilities only The port will advertise symmetric pause capabilities only

The port will advertise both symmetric and asymmetric Rx pause capabilities.

Example:

P130-1# set port auto-negotiation-flowcontrol-advertisement 1/51 asym-tx-only

Port 1/51 pause capabilities was set

Avaya P130 User’s Guide 75