Chapter 6 Avaya P130 CLI

Set port redundancy Command

Use the set port redundancy command to define/remove redundancy schemes between a Primary and a Secondary link. The link can be any port that does not belong to a LAG, or a LAG interface. In either case, there should not be any redundancy scheme already defined on any of the links.

The syntax for this command is:

set port redundancy <mod_num>/<prim_port_num> <mod_num>/ <second_port_num> {on/off} [<redundancy_name>]

<mod_num> <prim_port_num> <second_port_num> <redundancy_name>

Example:

Module number

Primary link of the redundancy scheme Secondary link of the redundancy scheme Name for the redundancy scheme (optional)

P130-1# set port redundancy 1/7 2/12 on red1 uplink: Port 2/12 is redundant to port 1/7.

Port redundancy is active - entry is effective immediately

Show port redundancy Command

Use the show port redundancy command to display information about all redundancy schemes defined in the switch.

The syntax for this command is:

show port redundancy

Example:

 

 

 

P130-N> show port redundancy

 

 

Redundancy Name

Primary Port

Secondary Port

Status

---------------

------------

--------------

------

fast

1/7

2/12

enable

uplink

1/13

3/20

enable

78

Avaya P130 User’s Guide

Page 92
Image 92
Avaya P130 manual Set port redundancy Command, Show port redundancy Command