Avaya manual Set qos trust Command, P130-Nsuper# set qos trust dscp

Chapter 6 Avaya P130 CLI

Set qos trust Command

Use the set qos trust command to configure which of the incoming packet's priority parameters should be considered when determining the new assigned priority. You can configure the P130 to trust either the cos (the 802.1p priority), or the dscp (the DSCP value). The default value is trust-cos.

The syntax for this command is:

set qos trust {untrusted trust-cos trust-dscp trust- cos-dscp}

Note: The untrusted and trust-cos-dscp options are not operational on the P130.

Example:

P130-N(super)# set qos trust dscp

IP port range upper limit for Command

Use the ip port range upper limit for command to determine the valid port range in a list.

The syntax for this command is:

ip port range upper limit for <lower_limit>

Example:

P130-N(super)# ip port range upper limit for 2048 Upper limit options: 2048,2049,2051,2055,2063,2079,2111,2175,2303,2559,3071,4095

126 Avaya P130 User’s Guide