Avaya P130 manual Snmp Commands, Show snmp Command, Show snmp retries Command

Chapter 6 Avaya P130 CLI

SNMP Commands

Show snmp Command

Use the show snmp command to display SNMP information.

The syntax for this command is:

show snmp

Example:

P130-N> show snmp

Authentication trap disabled

Community-Access	Community-String
----------------	----------------
read-only	public
read-write	public
trap	public
Trap-Rec-Address	Traps Enabled
----------------	----------------
1.1.1.1	config
etc...	fault

Show snmp retries Command

Use the show snmp retries command to display the number of retries initiated by the Device Manager application when it tries to send SNMP messages to the device.

The syntax for this command is:

show snmp retries

Example:

P130-N> show snmp retries the SNMP Retries Number is 3

Avaya P130 User’s Guide 113