Avaya manual Port Commands, Show port Command, P130-N show port modnum/portnum

Chapter 6 Avaya P130 CLI

Port Commands

Show port Command

Use the show port command to display port status.

The syntax for this command is:

P130-N> show port [mod_num[/port_num]]

mod_num	Module number (optional). If you do not specify a
	number, the ports on all modules are shown.
port_num	Number of the port on the module (optional). If you
	do not specify a number, all the ports on the module
	are shown.

Example:

To display the status for port 4 on module 1:

P130-N> show port	1/4
Port Name Status	VLAN Level Neg	Dup. Spd. Type

--------- ------ ----- ------ ----- ---- ------ ------

1/4 NoName disabled 203 normal enable full 100M 100BaseT

Show Port Output Fields:
Field	Description
Port	Module and port number
Name	Name of the port
Status	Status of the port (connected, faulty, disabled)
VLAN	VLAN ID of the port
Level	Priority level of the port (normal or high)
Neg	The negotiation status of the port (enable, disable)
Duplex	Duplex setting for the port (fdx, hdx)
Speed	Speed setting for the port (10, 100, 1000)
Type	Port type, for example, 10/100BaseTX, GBIC_SX,
	GBIC_LX, GBIC_not present, GBIC_unknown, 1000Base-
	T

66 Avaya P130 User’s Guide