
Appendix B | Specifications |
|
|
Caution: The use of optical instruments with this product will increase eye hazard.
Usage Restriction
When a SFF/SFP GBIC transceiver is inserted in the module but is not in use, the Tx and Rx ports should be protected with an optical connector or a dust plug.
Caution: Use only Avaya approved SFF/SFP GBIC transceivers. All approved SFF/ SFP GBIC transceivers:
1)Are 3.3V. Do not insert a 5V SFF/SFP GBIC.
2)Use Serial Identification. Do not use a GBIC that utilizes Parallel Identification.
Installation
Installing and Removing a SFF/SFP GBIC Transceiver
Caution: Use only 3.3V
Use only SFF/SFP GBIC transceivers that use Serial Identification.
The SFF/SFP GBIC transceiver is fastened using a
To Install the SFF/SFP GBIC tranceiver:
•Insert the transceiver (take care to insert it the right way up) until it clicks in place.
To Remove the SFF/SFP GBIC tranceiver:
1Press the clip on the bottom side of the transceiver.
2Pull the transceiver out.
136 | Avaya P130 User’s Guide |