Chapter 6 Avaya P130 CLI
The syntax for this command is:
set time client [enable disable]
Example:
Time client mode enable.
Time client mode disabled
Set time server Command
Use the set time server command to set the IP address for the time server.
The syntax for this command is:
set time server <IP address>
Example:
The Server Ip has been set to 1.2.3.4
Show time parameters Command
Use the show time parameters command to display the current settings for all time related parameters.
The syntax for this command is:
show time parameters
Example:
Client status: Enabled |
| |
Current time | : 03:43:43 04 JUL 2002 UTC | |
Timezone set | to 'UTC', offset from UTC is 0 hours | |
: 1.2.3.4 |
| |
Time acquired from | ||
Time protocol set to | : TIME protocol | |
46 | Avaya P130 User’s Guide |
