![](/images/new-backgrounds/1202796/202796249x1.webp)
Chapter 6 Avaya P130 CLI
Requested # of time intervals, ie buckets, is 20 Granted # of time intervals, ie buckets, is 20 Sample # 1 began measuring at 2:53:9
Received 62545 octets, 642 packets,
391 broadcast and 145 multicast packets,
0 undersize and 0 oversize packets,
0 fragments and 0 jabbers,
0 CRC alignment errors and 0 collisions,
#of dropped packet events (due to a lack of resources): 0 Network utilization is estimated at 0
Show rmon alarm Command
Use the show rmon alarm command to show the parameters set for a specific alarm entry that was set using the rmon alarm command or using the P130 Device Manager.
The syntax for this command is:
show rmon alarm [<Alarm Index>]
Example:
P130-N> show rmon alarm 1026
alarm
alarm 1026 is active, owned by amir Monitors ifEntry.1.1026 every 60 seconds Taking delta samples, last value was 1712
Rising threshold is 10000, assigned to event # 1054 Falling threshold is 10, assigned to event # 1054 On startup enable rising or_falling alarms
Show rmon event Command
Use the show rmon event command to show the parameters of an Event entry defined by the rmon event command or using the P130 Device Manager.
The syntax for this command is:
show rmon event [<Event Index>]
Example:
event
Avaya P130 User’s Guide | 111 |