Chapter 6 Avaya P130 CLI
VLAN Commands
Show trunk Command
Use the show trunk command to display VLAN tagging information of the ports.
The syntax for this command is:
show trunk [<mod_num>[/<port_num>]]
<mod_num> | Module number |
|
| |
<port_num> | Number of the port on the module |
| ||
Example: |
|
|
| |
|
|
| ||
show trunk 1/22 | Native vlan Vlans allowed on trunk | |||
Port | Mode | Binding mode | ||
1/22 | off | statically bound | 1 | 1 |
Following are the show trunk command output fields:
Field | Description |
Port | Module and port number(s) |
Mode | Tag status of the port (ON - dot1Q tagging mode, |
| OFF - clear mode). |
Native VLAN | Number of the Port VLAN ID (the VLAN to which received |
| untagged traffic will be assigned). If the Port is in “clear |
| mode” only frames of this VLAN will be transmitted. |
VLANs allowed | Range of values allowed on the Trunk |
on trunk |
|
Avaya P130 User’s Guide | 87 |
