Avaya P130-1# set port level 1/2 Port 1/2 port level set to, Set port negotiation Command

Chapter 6 Avaya P130 CLI

0-7 Priority level

Example:

To set the priority level for port 2 on module 1 to 7:

P130-1# set port level 1/2 7

Port 1/2 port level set to 7.

Set port negotiation Command

Use the set port negotiation command to enable or disable the link negotiation protocol on the specified port. This command applies to Fast Ethernet or Gigabit Ethernet ports. When negotiation is enabled, the speed and duplex of the Fast Ethernet ports are determined by auto-negotiation. If autonegotiation is disabled, you can set these port parameters using the relevant CLI commands (if autonegotiation is enabled, these commands have no effect).

The syntax for this command is:

set port negotiation <mod_num/port_num> {enable disable}

mod_num	Module number
port_num	Number of the port on the module
enable	Enable the link negotiation protocol
disable	Disable the link negotiation protocol

Avaya P130 User’s Guide 71