Avaya P130 manual Set radius authentication retry-number Command

Chapter 6 Avaya P130 CLI

Set radius authentication retry-number Command

Use the set radius authentication retry-number command to set the number of times an access request is sent when there is no response.

The syntax for this command is:

set radius authentication retry number <number>

<number> Retry number

Set radius authentication udp-port Command

Use the set radius authentication udp-portcommand to set the RFC 2138 approved UDP port number. Normally, the UDP port number should be set to its default value of 1812. Some early implementations of the RADIUS server used port number 1645.

The syntax for this command is:

set radius authentication server udp-port <18121645>

Avaya P130 User’s Guide 107