Avaya P130 Validate-group Command, Set qos policy-source Command, Set qos policy-source source

Chapter 6 Avaya P130 CLI

Validate-group Command

Use the validate-groupcommand to verify that all the rules in a priority list are valid.

If there is a configuration problem with a specific rule, or with a number of rules, detailed error messages will be given.

The syntax for this command is:

validate-group<policy-list-number>[quiet]

quiet Does not display error messages

Example:

P130-N(super)# validate-group 101

Set qos policy-source Command

Use the set qos policy-sourcecommand to set the policy source. The default policy source is policy-server.

Note: Before configuring the IP access list, you must change the policy source mode to local.

The syntax for this command is:

set qos policy-source <source>

<source> local policy-server

Example:

P130-N(super)# set qos policy-source local

124 Avaya P130 User’s Guide