Chapter 6 Avaya P130 CLI
Show port
Use the show port
The syntax for this command is:
show port
mod_num | Module number |
port_num | Number of the port on the module |
Example:
Port 1/2 advertises
Port 1/2 does not support this feature.
Port 1/3 advertises no flow control capabilities. etc.
Show port trap Command
Use the show port trap command to display information on SNMP generic link up/down traps sent for a specific port.
The syntax for this command is:
show port trap [<mod_num>[/<port_num>]]
mod_num | Module number |
port_num | Number of the port on the module |
Example:
P130-N> show port trap 1/1
Port 1/1 up/down trap is disabled
68 | Avaya P130 User’s Guide |
