100-398-01 19
Command line

Chapter 4

Using the command line interface
Refer to the Smart Ringswitch Family User Guide (part number 100-291) for information about setting up
Ringswitch serial ports, telnet sessions and generic commands to use the command line interface. The Smart
Ringswitch Family User Guide also contains a reference of all Ringswitch and option module command lines.

Configuring the Smart Ringswitch Gigabit Module

If you have a Smart Ringswitch Gigabit Module installed, you can use the following commands to configure
the card.
Setting the Gigabit port IPX mode
The set gigabitpor t IPX mode command enables or disa bles the translational bridging of IPX frames.
Command: >set Gigabit port IPX mode <slot>:<port> <1,2>
Parameter: slot Slot number
port Port number
1Enable
2Disable
Gigdoc.book Page 19 Tuesday, October 17, 2000 9:44 AM