Chapter 4 Using the command line interface
22 Using the Smart Ringswitch Gigabit Module
Setting the Gigabit port IPX address
The set gigabit port IPX address command specifies the IPX network number for the port. If this is zero then
the IPX network number is learned automatically by the Gigabit port.
Setting the Gigabit port IP mode
The set gigabit port IP mode command enables or disables the translational bridging of IP frames.
Command: >set Gigabit port IPX address <slot>:<port> <number>
Parameter: slot Slot number
port Port number
number IPX network number
Command: >set Gigabit port IP mode <slot>:<port> <1,2>
Parameter: slot Slot number
port Port number
1Enable
2Disable
Gigdoc.book Page 22 Tuesday, October 17, 2000 9:44 AM