Avaya P130 manual Copy module-config tftp Command, Copy module-config tftp filename ip modnum

Chapter 6 Avaya P130 CLI

Copy module-config tftp Command

Use the copy module-config tftp command to upload the module-level parameters from the current NVRAM running configuration into a file via TFTP.

The syntax for this command is:

copy module-config tftp <filename> <ip> <mod_num>

<filename>	File name (full path)
<ip>	The IP address of the host
<mod_num>	Module number

Example:

P130-1# copy module-config tftp c:\p130\switch1.cfg 192.168.49.10 5

Beginning upload operation ...

This operation may take a few minutes...

Please refrain from any other operation during this time.

For more information , use 'show tftp upload status' command

Copy tftp stack-config Command

Use the copy tftp stack-configcommand to download the stack-level configuration from a saved file into the current NVRAM running configuration, via TFTP.

The syntax for this command is:

copy tftp stack-config <filename> <ip>

<filename>	File name (full path)
<ip>	The IP address of the host

Example:

P130-1# copy tftp stack-config c:\p130\switch1.cfg 192.168.49.10

Avaya P130 User’s Guide 59