
Chapter 6 Avaya P130 CLI
Example:
To disable link negotiation protocol on port 4, module 1:
Link negotiation protocol disabled on port 1/4.
Set port enable Command
Use the set port enable command to enable a port or a range of ports. The syntax for this command is:
set port enable <mod_num/port_num>
mod_num | Module number |
port_num | Number of the port on the module |
Example:
To enable port 3:
Port 1/3 enabled.
Set port disable Command
Use the set port disable command to disable a port or a range of ports.
Note: If you have disabled a particular port but the link is still connected, the LED for that port will remain ON.
The syntax for this command is:
set port disable <mod_num/port_num>
mod_num | Module number |
port_num | Number of the port on the module |
Example:
Port 1/10 disabled.
72 | Avaya P130 User’s Guide |