Chapter 6 Avaya P130 CLI

Reset Commands

Reset Command

Use the reset command to restart the P130 switch. You must type the command in full.

The syntax for this command is:

reset {<mod_num>}

 

<mod_num>

Number of the module to be restarted

Example:

P130-1# reset

This command will force a switch-over to the master module and disconnect your telnet session.

Do you want to continue (y/n) [n]? y Connection closed by foreign host.

Nvram initialize Command

Use the nvram initialize command reset the P130 parameters to the factory defaults. If no options are specified for this command, only the Layer 2 parameters will be reset.

The syntax for this command is:

nvram initialize {switch all}

switch

Resets all the switching level parameters (Layer 2

 

only)

all

Resets all parameters including Multilayer Policy

 

parameters

Example:

P130# nvram initialize

This command will force a factory default and switch-over to the master module and disconnect your telnet session.

Do you want to continue (y/n) [n]? y Connection closed by foreign host. host%

Avaya P130 User’s Guide

65

Page 79
Image 79
Avaya P130 manual Reset Commands, Reset modnum, Nvram initialize Command, Nvram initialize switch all