Using the
Naming Presets |
| Editing Preset Names |
You can name your radio presets for easy identification. Names can be up to eight characters long.
You can edit the names of presets as follows.
|
| DISPLAY |
|
| 1 Select the preset whose name you |
|
|
|
|
| want to edit. |
STANDBY / ON |
|
|
|
| See page 23 for information on selecting presets. |
STANDBY |
| PAUSE | STOP | PLAY |
|
PHONES |
|
| INPUT | DIRECT | 2 Press and hold down the [DISPLAY] |
SPEAKERS A / B MEMORY FM MODE |
| DISPLAY | |||
CLEAR | TUNING | PRESET |
|
| |
MEMORY | TUNING | PRESET |
| button for about 3 seconds. | |
|
| ||||
1 Select the preset that you want to name.
See page 23 for information on selecting presets.
2 Press and hold down the [DISPLAY] button for about 3 seconds.
3 Use the PRESET [
]/[
] buttons to select a character.
The following characters are available:
_(space) A B C D E F G H I J K L M N O P Q R S T U V W X Y Z
a b c d e f g h i j k l m n o p q r s t u v w x y z
"' @ & ( ) * + ,
0 1 2 3 4 5 6 7 8 9
Select “_(space)” if you want to leave a space between words.
3 Use the TUNING [
]/[
] buttons to select the character that you want to edit.
The currently selected character flashes.
4 Use the PRESET [
]/[
] buttons to select a new character.
Repeat steps 3 and 4 to edit other characters.
To delete a character, select it, and choose “_(space)”.
5 Select the eighth character, and then press the [MEMORY] button to con- firm the edit.
Displaying a Preset Station’s Frequency
When a preset has been named, when it’s selected, its name appears on the display. You can display the frequency of the preset’s station as follows.
4 Press the [MEMORY] button to enter the character.
The cursor moves to the next character.
5 Repeat steps 3 and 4 to enter seven more characters.
When you press the [MEMORY] button after selecting the eighth character, “Complete” appears on the dis- play, indicating that the naming process is complete. If the name you’re entering consists of less than eight characters, to complete the process, select “_(space)” and then press [MEMORY].
Notes:
•You can’t name presets set to RDS stations that transmit PS (Program Service Name) information. See page 23 for more information on RDS.
1 Press the [DISPLAY] button repeat- edly to display the preset name or pre- set frequency (and preset number).
24
