Onkyo CR-L5 Repeat Playback, Random Playback, To Stop Memory Playback, To Cancel Memory Playback

CR-L5_E.book Page 21 Monday, May 19, 2003 4:05 PM

Playing CDs—Continued

Repeat Playback

With the Repeat function you can play all tracks repeatedly.

1 During playback, press the remote controller’s [REPEAT] button.

The REPEAT indicator appears on the display and all tracks are played repeatedly.

2 To cancel Repeat playback, press the [REPEAT] button again.

The REPEAT indicator disappears.

Notes:

•If you press the [REPEAT] button during memory play- back, your custom program will play repeatedly.

•If you press the [REPEAT] button during random play- back, tracks will be played in random order repeatedly.

In this example, track #8 is the fifteenth track to be added to the program.

The total memory playback time is displayed.

You can check which tracks you’ve added to the pro- gram by using the [ ]/[ ] buttons.

You can add up to 25 tracks to your program.

3 To start memory playback, press the Play [ ] button.

Memory playback stops automatically when all the

Random Playback

With the Random function you can play tracks in random order.

tracks in the program have been played.

■To Stop Memory Playback

Press the Stop [] button.

1 While stopped, press the [PLAY MODE] button repeatedly until the RANDOM indicator appears on the display.

2 Press the Play [ ] button to start ran- dom playback.

3 To cancel random playback, stop play- back, and then press the [PLAY MODE] button repeatedly until the RANDOM indicator disappears.

Memory Playback

With the Memory function you can make a custom program of your favorite tracks.

■To Remove the Last Track in the

Program

While memory playback is stopped, press the [CLEAR] button. Each time you press it the last track in the program is removed.

■To Cancel Memory Playback

While memory playback is stopped, press the [PLAY MODE] button repeatedly until the MEMORY indicator disappears. The entire program will be deleted.

Notes:

•If you try to add more than 25 tracks to your program, the message “Memory Full” appears on the display.

•If the total playing time of your program exceeds 99 min- utes and 59 seconds, “---:--” is displayed. (This does not affect program playback.)

•The program is deleted when the disc tray is opened.

1 While stopped, press the [PLAY MODE] button repeatedly until the MEMORY indicator appears on the display.

2 To add a track to your program, use the [ ]/[ ] buttons to select it, and then press the [ENTER] button.

Tracks can also be added by using the number buttons. For example, to add track number 6, press [6]. To add track 13, press [>10], [1], [3].

21