Onkyo Other Functions, Adjusting the Bass & Treble, Muting the CR-L5, Using Direct Mode

CR-L5_E.book Page 25 Monday, May 19, 2003 4:05 PM

Other Functions

ON	STANDBY
			TONE
▼	▲	INPUT
			TIMER
1	2	3
4	5	6	▲
7	8	9	▼
>10	10/0	ENTER
SLEEP	VOLUME
	UP
	MUTING
CLOCK CALL	DOWN		DIRECT

DIMMERDISPLAY

TONE

ENTER

MUTING DIRECT

Adjusting the Bass & Treble

With the Bass and Treble functions you can adjust the tone of the sound to your personal preference.

1 Use the remote controller’s [TONE] button to select “Bass” or “Treble”.

2 Use the remote controller’s Up/Down []/[ ] buttons to adjust the bass or treble.

DIMMER

CD PLAY MODE

CDRCLEAR

TAPEREPEAT

Muting the CR-L5

With this function you can temporarily mute the output of the CR-L5.

The bass and treble can be adjusted from –10 to +10 in increments of 2.

3 When you’ve finished, press the [ENTER] button.

You can temporarily bypass the Bass and Treble func- tions by using Direct mode.

1 Press the remote controller’s [MUT- ING] button.

The output is muted and the MUTING indicator flashes on the display, as shown.

2 To unmute the CR-L5, press the [MUT- ING] button again, or adjust the remote controller’s volume []/[ ] buttons.

The output is unmuted and the MUTING indicator goes off.

Note: The Mute function is cancelled when the CR-L5 is set to Standby.

Adjusting the Display Brightness

You can adjust the display brightness as follows.

1 Press the [DIMMER] button repeatedly to select: dim, dimmer, or normal brightness.

Using Direct Mode

In Direct mode, the bass and treble tone circuits are bypassed, creating a shorter signal path for a purer sound.

1 Press the [DIRECT] button.

Direct mode is turned on and the DIRECT indicator lights up.

2 To turn off Direct mode, press the [DIRECT] button again.

The DIRECT indicator goes off.

Note: If you press the remote controller’s [TONE] button while Direct Mode is on, Direct mode will be cancelled.

25