Onkyo Using the CR-L5, Selecting Sound Sources, Selecting Speaker Sets, Adjusting the Volume

CR-L5_E.book Page 19 Monday, May 19, 2003 4:05 PM

Using the CR-L5

VOLUME control

VOLUME

		PAUSE	STOP	PLAY
SPEAKERS A / B MEMORY FM MODE		DISPLAY	INPUT	DIRECT
CLEAR	TUNING	PRESET

SPEAKERS A/B INPUT

ON STANDBY

INPUT /			TONE
▼	▲	INPUT
			TIMER
1	2	3
4	5	6	▲
7	8	9	▼
>10	10/0	ENTER

SLEEP	VOLUME	VOLUME	UP
	UP
		VOLUME	DOWN
	MUTING
CLOCK CALL	DOWN	DIRECT
DIMMER		DISPLAY
	CD	PLAY MODE
	CDR	CLEAR
	TAPE	REPEAT
	RC-535S

Selecting Sound Sources

1 Use the INPUT []/[ ] buttons, or the remote controller’s INPUT []/[ ] but- tons to select one of the following sound sources: CD, FM or AM, CD-R, TAPE, TV/LINE.

The currently selected source is shown on the display. In the following example, CD has been selected.

2 If you selected CD, see “Playing CDs” on page 20.

If you selected AM or FM, see “Using the Radio” on page 22.

If you selected CD-R, TAPE, or TV/LINE, start play- back on the relevant component.

Selecting Speaker Sets

When you connect two sets of speakers, you can listen to set A, set B, or both.

1 Use the [SPEAKERS A/B] button to select the following options: A, B, A+B, or off.

A B A B Off

The speaker indicators on the display show the current setting. In the following example, only speaker set A is on.

Adjusting the Volume

1 To adjust the volume, use the VOLUME control, or the remote controller’s VOLUME []/[ ] buttons.

Turn the VOLUME control clockwise to increase the volume; counterclockwise to decrease it.

Using Headphones

You can connect a pair of stereo headphones (1/4-inch phone plug) to the CR-L5’s PHONES jack for private listen- ing, as shown.

STANDBY / ON

STANDBY

PHONES

Notes:

•Always turn down the volume before connecting your headphones.

•Speaker sets A and B are turned off while the headphones plug is inserted in the PHONES jack.

19