Avaya P130 manual Set radius authentication server ip-addrprimarysecondary

Chapter 6 Avaya P130 CLI

Set radius authentication server Command

Use the set radius authentication server command to set a primary or secondary RADIUS server IP address.

The syntax for this command is:

set radius authentication server <ip-addr><primarysecondary>

<ip-addr>	IP address of the RADIUS authentication server
<primary>	Default - Primary authentication server
<secondary>	Secondary authentication server

Example:

P130-N(super)# set radius authentication server 149.49.38.12 primary

Clear radius authentication server Command

Use the clear radius authentication server command to remove a primary or secondary RADIUS authentication server.

The syntax for this command is:

clear radius authentication server[{primarysecondary}]]

primary	Primary authentication server
secondary	Secondary authentication server

Example:

P130-N(super)# clear radius authentication server primary

Set radius authentication retry-time Command

Use the set radius authentication retry-time command to set the time to wait before re-sending an access request.

The syntax for this command is:

set radius authentication retry time <time>

<time> Retry time in seconds

106 Avaya P130 User’s Guide