Avaya manual Show dscp Command, P130-1# show dscp, Ip access-group Command

Chapter 6 Avaya P130 CLI

Show dscp Command

Use the show dscp command to see the DSCP table.

The syntax for this command is:

show dscp

Example:

P130-1# show dscp

set qos trust trust-cos
DSCP	table validity status: Valid			ApplicType	Name
DSCP	Action	Precedence	ApplicStatus
----	------	----------	------------- ------------- ----------
5	fwd3	mandatory	applicable	quasi-static	DSCP #5
21	fwd6	mandatory	applicable	quasi-static	DSCP #21
45	fwd7	mandatory	applicable	quasi-static	DSCP #45
60	fwd1	mandatory	applicable	quasi-static	DSCP #60

ip access-group Command

Use the ip access-groupcommand to activate a specific policy list. To deactivate the policy list, use the no version of this command.

The syntax for this command is:

[no] [ip] access-group<policy-list-number>[<default-action>]

<priority-list-number> Integer (100..199)

<default-action> default-action-denydefault-action-permit

P130-1# ip access-group 101

Policy list 101 was activated successfully

120 Avaya P130 User’s Guide