Advantech RS-485 user manual Syntax $aaSicr, Response Datadatadatacr if the command is valid

	Chapter 6
$aaSi	$aaSi
Name	All RTD Data In
Description	Returns the input values of all channels of a specified
	RTD input module in a specified system in engineering
	units only.
Syntax	$aaSi(cr)
	$ is a delimiter character.
	aa (range 00-FF) represents the 2-character hexadecimal
	address of the ADAM-5000 system you want to
	interrogate.
	Si is the I/O slot of the ADAM-5000 system you want to
	read.
	(cr) is the terminating character, carriage return (0Dh).
Response.	>(data)(data)(data)(cr) if the command is valid.
	?aa(cr) if an invalid operation was entered.
	There is no response if the module detects a syntax error
	or communication error or if the specified address does
	not exist.
	> delimiter character indicating a valid command was
	received.
	? delimiter character indicating the command was
	invalid.
	aa (range 00-FF) represents the 2-character hexadecimal
	address of the ADAM-5000 system.
	(data) is the input value in engineering units of the
	interrogated module of the specified system. The (data)
	from all channels is shown in sequence from 0 to 2. If
	(data)=“ ”, it means the channel is invalid.
	(cr) is the terminating character, carriage return (0Dh).

ADAM-5000 6-25