Advantech RS-485 user manual Syntax $aaSiCjAhcr

	5013/5017/5017H/5018
Command Set	Analog Input Alarm
$aaSiCjAh	$aaSiCjAh

Name	Read Alarm Mode
Description	Returns the alarm mode for the specified channel in the
	specified ADAM-5000 system.
Syntax	$aaSiCjAh(cr)
	$ is a delimiter character.
	aa (range 00-FF) represents the 2-character hexadecimal
	address of an ADAM-5000 system.
	SiCj identifies the desired slot i (i : 0 to 3) and the
	desired channel j (j : 0 to 7).
	Ah is the Read Alarm Mode command.
	h indicates alarm type and can have the value H = High
	alarm, L = Low alarm
	(cr) represents terminating character, carriage return
	(0Dh)
Response	!aas(cr) if the command was valid
	There is no response if the system detects a syntax error
	or communication error or if the specified address does
	not exist.
	! delimiter character indicating a valid command was
	received.
	aa represents the 2-character hexadecimal address of the
	corresponding ADAM-5000 system.
	s indicates alarm mode and can have the value M =
	Momentary mode, L = Latching mode
	(cr) represents terminating character, carriage return
	(0Dh)

6-74 ADAM-5000