Advantech RS-485 user manual Example command $0AS1C14cr

Command Set	5024 Analog Output
$aaSiCj4	$aaSiCj4

Example command: $0AS1C14(cr)

response: !0A(cr)

Presume the present output value of channel 1 of slot 1 in the ADAM-5000 system at address 0Ah is 9.4 mA. The command tells the analog output module to store the present output value in its non-volatile memory. When the system is powered up or reset, its default output value will be 9.4 mA.

The response from the ADAM-5000 system at address 0Ah indicates the command has been received.

Note: An analog output module requires a maximum of 6 milliseconds after it receives a Startup Output Current/Voltage Configuration command to let the settings take effect. During this interval, the module cannot be addressed to perform any other actions.

6-98 ADAM-5000