Advantech RS-485 user manual Wiring and Connections, DC Power Supply Unit Wiring

Chapter 2

Figure 2-6 ADAM-5000E Rail mounting

2.5Wiring and Connections

This section provides basic information on wiring the power supply and I/O units, and on connecting the network.

DC Power Supply Unit Wiring

Be sure that the DC power supply voltage remains within the allowed fluctuation range of between 10 to 30 VDC. Terminals +VS and GND are for power supply wiring.

Note: The wire(s) used should be at least 2mm2.

ADAM-5000 2-9