Advantech RS-485 user manual Syntax $aaSiCjRhCcr

	5013/5017/5017H/5018
Command Set	Analog Input Alarm
$aaSiCjRhC	$aaSiCjRhC

Name	Read Alarm Connection
Description	Returns the High/Low alarm limit output connection of a
	specified input channel in the addressed ADAM-5000
	system
Syntax	$aaSiCjRhC(cr)
	$ is a delimiter character.
	aa (range 00-FF) represents the 2-character hexadecimal
	address of an ADAM-5000 system.
	SiCj identifies the desired slot i (i : 0 to 3) and the
	desired analog input channel j (j : 0 to 7).
	RhC is the Read Alarm Connection command.
	h indicates alarm type and can have the value H = High
	alarm, L = Low alarm
	(cr) represents terminating character, carriage return
	(0Dh)
Response	!aaSkCn(cr) if the command was valid
	There is no response if the system detects a syntax error
	or communication error or if the specified address does
	not exist.
	! delimiter character indicating a valid command was
	received.
	aa represents the 2-character hexadecimal address of the
	corresponding ADAM-5000 system.
	SkCn identifies the desired slot k (k : 0 to 3) and the
	desired digital output point n (n : 0 to F) to which the
	input alarm is connected. If the values of k and n are ‘*’,
	the analog input has no connection with a digital output
	point.

6-82 ADAM-5000