Advantech RS-485 user manual Syntax $aaSiCj6cr

	Chapter 6
$aaSiCj6	$aaSiCj6
Name	Last Value Readback
Description	Returns either the last value sent to the specified
	channel by a #aaSiCj(data) command, or the start-up
	output current/voltage.
Syntax	$aaSiCj6(cr)
	$ is a delimiter character.
	aa (range 00-FF) represents the 2-character hexadecimal
	address of the ADAM-5000 system.
	SiCj identifies the I/O slot i (i : 0 to 3) and the channel
	j (j : 0 to 3) for the module you want to return a prior
	value.
	6 is the last value readback command.
	(cr) is the terminating character, carriage return (0Dh)
Response	!aa(data)(cr) if the command is valid.
	?aa(cr) if an invalid operation was entered.
	There is no response if the module detects a syntax error
	or communication error or if the specified address does
	not exist.
	! delimiter character indicating a valid command was
	received.
	? delimiter character indicating the command was
	invalid.
	aa (range 00-FF) represents the 2-character hexadecimal
	address of an ADAM-5000 system.
	(data) is the value that is returned by the analog output
	module. The format of the data depends on the module‘s
	configurated data format.
	(cr) is the terminating character, carriage return (0Dh)

ADAM-5000 6-105