Advantech RS-485 user manual Syntax $aaSiØcr

	Chapter 6
$aaSiØ	$aaSiØ
Name	Read Digital filter scale
Description	Read the filter seconds to start to measure the input
	signal.
Syntax	$aaSiØ(cr)
	$ is a delimiter character.
	aa (range 00-FF) represents the 2-character hexadecimal
	address of the ADAM-5000 system which is to be
	calibrate.
	Si identifies the I/O slot which is to be accessed.
	Ø is the command for reading digital filter scale.
	(cr) is the terminating character, carriage return (0Dh)
Response	!aa(data)(cr) if the command is valid.
	?aa(cr) if an invalid operation was entered.
	There is no response if the module detects a syntax error
	or communication error or if the specified address does
	not exists.
	! delimiter character indicating a valid command was
	received.
	? delimiter character indicating the command was
	invalid.
	aa (range 00-FF) represents the 2-character hexadecimal
	address of an ADAM-5000 system.
	(data) represents filter secends from 8 µs~65000 µs. Be
	aware that (data) has 5 characters.
	(cr) is the terminating character, carriage return (0Dh)

ADAM-5000 6-133