Advantech RS-485 user manual Syntax $aaSiCj5scr

	Chapter 6
$aaSiCj5s	$aaSiCj5s
Name	Set Counter Start/Stop
Description	Request the addressed counter/frequency module to
	start or stop the counting.
Syntax	$aaSiCj5s(cr)
	$ is a delimiter character.
	aa (range 00-FF) represents the 2-character hexadecimal
	address of the ADAM-5000 system.
	SiCj identifies the I/O slot i and the channel j of the
	module you want to set.
	5 is the command for setting counter Start/Stop.
	s represents start/stop command.
	s=0 indicate stop counter.
	s=1 indicate start counter.
	(cr) is the terminating character, carriage return (0Dh)
Response	!aa(cr) if the command is valid.
	?aa(cr) if an invalid operation was entered.
	There is no response if the module detects a syntax error
	or communication error or if the specified address does
	not exists.
	! delimiter character indicating a valid command was
	received.
	? delimiter character indicating the command was
	invalid.
	aa (range 00-FF) represents the 2-character hexadecimal
	address of an ADAM-5000 system.
	(cr) is the terminating character, carriage return (0Dh)

ADAM-5000 6-135