Advantech RS-485 user manual Syntax $aaSi1cr

	Chapter 6
$aaSi1	$aaSi1
Name	RTD Zero Calibration
Description	Calibrates a specified RTD input module of a specified
	system to correct for offset errors.
Syntax	$aaSi1(cr)
	$ is a delimiter character.
	aa (range 00-FF) represents the 2-character hexadecimal
	address of the ADAM-5000 system which contains the
	module which is to be calibrated.
	Si identifies the slot i (i:0 to 3) containing the RTD
	module to be calibrated.
	1 represents the zero calibration command.
	(cr) is the terminating character, carriage return (0Dh).
Response.	!aa(cr) if the command is valid.
	?aa(cr) if an invalid operation was entered.
	There is no response if the module detects a syntax error
	or communication error or if the specified address does
	not exist.
	! delimiter character indicating a valid command was
	received.
	? delimiter character indicating the command was
	invalid.
	aa (range 00-FF) represents the 2-character hexadecimal
	address of an ADAM-5000 system.
	(cr) is the terminating character, carriage return (0Dh).

ADAM-5000 6-35