Advantech RS-485 user manual Analog Input Alarm Command Set

				Chapter 6
6.7 Analog Input Alarm Command Set
	Command Syntax		Command Name	Description
	$aaSiCjAhs		Set Alarm Mode	Sets the High/Low alarm
				in either Momentary or
				Latching mode.
	$aaSiCjAh		Read Alarm Mode	Returns the alarm mode
				for the specified
				channel.
	$aaSiCjAhEs		Enable/Disable Alarm	Enables or Disables the
				High/Low alarm of the
				specified channel
	$aaSiCjCh		Clear Latch Alarm	Resets a latched alarm
	$aaSiCjAhCSkCn		Set Alarm Connection	Connects the High/Low
				alarm of a specified
				input channel to a
				specified digital output
				channel
	$aaSiCjRhC		Read Alarm Connection	Returns the alarm limit
				output connection of a
				specified input channel
	$aaSiCjAhU(data)		Set Alarm Limit	Sets the High/Low alarm
				limit value for the
				specified input channel
	$aaSiCjRhU		Read Alarm Limit	Returns the High/Low
				alarm limit value for the
				specified input channel
	$aaSiCjS		Read Alarm Status	Reads whether an alarm
				occurred for a specified
				input channel
	Note:	This command set applies to the ADAM-5013,
		ADAM-5017, ADAM-5017H and the ADAM-5018.

ADAM-5000 6-71